Benches shall have seats that are 42 inches (1065 mm) long minimum and 20 inches (510 mm) deep minimum and 24 inches (610 mm) deep maximum....
Search Results "Patient Seated in Wheelchair"
-
903.3 Size
-
405.1 General
EXCEPTION: In assembly areas, aisle ramps adjacent to seating and not serving elements required to be on an accessible route shall not be required to comply with 405....
-
903.2 Clear Floor or Ground Space
Clear floor or ground space complying with 305 shall be provided and shall be positioned at the end of the bench seat and parallel to the short axis of the bench....
-
Sargent 8200 Mortise Lock with BHW Trim
Available with Microshield, an antimicrobial coating 6 Lobe head security screws (Torx type) Matching thumbturn available Patent Pending Ideally suited for: Behavioral Health Units, Patient...
-
National Council on Independent Living
argument has always been that providing the lowest transfer heights would be an extraordinary expense and burden on the business community (their consumer), not based on how it benefitted a patient...
-
A4.33.7 TYPES OF LISTENING SYSTEMS
A listening system that can be used from any seat in a seating area is the most flexible way to meet this specification....
-
§382.123(b)
(b) If a wheelchair exceeds the space provided for in §382.67 of this part while fully assembled but will fit if wheels or other components can be removed without the use of tools, you must...
-
Drive-up Public Telephones
Comments to the draft of the final guidelines noted that some public telephones are intended for use only from vehicles and recommended that they be exempt from the requirements for wheelchair...
-
11. Door Maneuvering Clearance
Is there adequate room for a person who uses a wheelchair to approach the bathroom door in each accessible guestroom bathroom from the pull side and pull it open without it hitting the wheelchair...
-
Rotational Penetrometer
A wheelchair caster placed on a spring loaded caliber in a metal tripod frame which suspends the caster about 6 inches over the surface. ...
-
McGuire Manufacturing Co., Inc. 155LATWC: Offset Lift and Turn PO Plug
Wheelchair lavatory strainer. Furnished with heavy brass elbow and 17GA seamless brass offset tailpiece. 8 3/4" x 5 1/8" OD....
-
ACCESSIBLE ROUTE
1-AC] A continuous unobstructed path connecting accessible elements and spaces of an accessible site, building or facility that can be negotiated by a person with a disability using a wheelchair...
-
ACCESSIBLE ROUTE
1-AC] A continuous unobstructed path connecting accessible elements and spaces of an accessible site, building or facility that can be negotiated by a person with a disability using a wheelchair...
-
§382.67(c)
(c) If you are a carrier that uses a closet as the priority space to stow a manual passenger wheelchair, you must install a sign or placard prominently on the closet indicating that such...
-
903.6 Structural Strength
Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the seat, fastener, mounting device, or...
-
1009.2.8 Submerged Depth
The lift shall be designed so that the seat will submerge to a water depth of 18 inches (455 mm) minimum below the stationary water level....
-
Submerged Depth
Submerged Depth Lifts must be designed so that the seat will submerge to a minimum of 18 inches below the stationary water level....
-
10. Shower Wand
Is there an adjustable height shower wand with at least a 60" long hose provided for persons who must shower from a seated position?...
-
2d
Is there an adjustable height shower wand with at least a 60" long hose provided for persons who must shower from a seated position?...
-
1j
Is there an adjustable height shower wand with at least a 60" long hose provided for persons who must shower from a seated position?...
-
11B-607.4.2.3 Head end wall
FIGURE 11B-607.4.2 GRAB BARS FOR BATHTUBS WITH REMOVABLE IN-TUB SEATS...
-
903.6 Structural Strength
Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the seat, fastener, mounting device, or...
-
1002.6.2 Transfer Height
The height of transfer device seats shall be 14 inches (355 mm) minimum and 24 inches (610 mm) maximum measured from the load and unload surface....
-
903.6 Structural Strength
Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the seat, fastener, mounting device, or...
