Controls or switches intended to be used by the occupant of the room or area to control lighting and receptacle outlets, appliances, alarms or cooling, heating and ventilating equipment...
Search Results "Sleeping Area"
Filters
Commonly Searched Documents
-
1136A.2 Switch and control heights
-
1136A.2 Switch and control heights
Controls or switches intended to be used by the occupant of the room or area to control lighting and receptacle outlets, appliances, alarms or cooling, heating and ventilating equipment...
-
11B-234.3 Minimum number
These rides are not exempt from the other provisions in Section 11B-234 requiring an accessible route to the load and unload areas and to the ride....
-
11B-201.1 Scope
All areas of newly designed and newly constructed buildings and facilities and altered portions of existing buildings and facilities shall comply with these requirements....
-
§382.91(d)
., between the terminal entrance and the gate, between gate and aircraft, from gate to a baggage claim area), you must assist passengers who are unable to carry their luggage because of...
-
Door and Signal Timing
Destination-oriented elevators may have call buttons located outside elevator landing areas and have enhanced programming features for the response time of cars....
-
221.8 Temporary Platforms or Other Movable Structures
located on (or obstructed by) temporary platforms or other movable structures, except that when an entire seating section is placed on temporary platforms or other movable structures in an area...
-
1. Location
Remember, walkways include areas where people must walk to access bus stops and other public transportation stops, so, where necessary, curb ramps must also be provided to enable people...
-
Accessible Routes
must comply with ADAAG provisions for the location, width (minimum of 36 inches), passing space, head room, surface, slope (maximum of 1:12 or 8.33%), changes in level, doors, egress, and areas...
-
806.2.4 Toilet and Bathing Facilities
Toilet and bathing fixtures required to comply with 603 through 610 shall be permitted to be located in more than one toilet or bathing area, provided that travel between fixtures does not...
-
806.2.4 Toilet and Bathing Facilities
Toilet and bathing fixtures required to comply with 603 through 610 shall be permitted to be located in more than one toilet or bathing area, provided that travel between fixtures does not...
-
Accessible Rides
must provide at least one wheelchair space, or at least one ride seat designed for transfer, or a transfer device designed to transfer a person using a wheelchair from the load and unload area...
-
5.2.2 Transfer Surface Size Recommendations for M302
Depending on the configuration of the equipment, the transfer surface may coincide with the seat area of an examination chair....
-
20. Q: What about holding cells and jails that are not accessible?
If meeting and/or interrogation rooms are provided, those areas should also be accessible for use by arrestees, family members, or legal counsel who have mobility disabilities....
-
§ 36.302(f)(9)(i)
For accessible seating in a designated wheelchair area, a public accommodation shall provide up to three companion seats for each person with a disability who requires a wheelchair space...
-
505.10 Handrail Extensions
In assembly areas, extensions shall not be required for ramp handrails in aisles serving seating where the handrails are discontinuous to provide access to seating and to permit crossovers...
-
§ 35.138(i)(1)
For accessible seating in a designated wheelchair area, a public entity shall provide up to three companion seats for each person with a disability who requires a wheelchair space, provided...
-
407.2.2.1 Visible and Audible Signals
Where in-car signals are provided, they shall be visible from the floor area adjacent to the hall call buttons. EXCEPTIONS: 1....
-
Accessible Routes to Programs and Services
The accessible route should be the same, or be located in the same area as, the general route used by people without mobility disabilities....
-
11B-602.9 Pedestrian protection
The protected area within which a drinking fountain is located shall be 32 inches (813 mm) wide minimum and 18 inches (457 mm) deep minimum, and shall comply with Section 11B-305.7....
-
1.1.3 Scope
In alteration projects, these provisions apply to the area of new work, and include the path of travel requirements found in Section 11B-202.4....
-
1.1 Balance of System (BOS) Equipment
1.1 Balance of System (BOS) Equipment - The BOS equipment, along with the area or enclosure housing it, qualifies for the machinery space and path of travel exceptions as long as the installation...
-
Safety Considerations for Site Selection
Evacuation will be easier and safer, if needed, as this allows many people with disabilities to travel unassisted on evacuation paths to a safe area outside....