Changes in level between ¼ inch (6.4 mm) high and ½ inch (13 mm) high maximum shall be beveled with a slope not steeper than 1:2.
Search Results "Sign Clear Floor Space"
Filters
Commonly Searched Documents
-
M303.3.2 Beveled
-
M303.1 General
Diagnostic equipment used by patients seated in a wheelchair shall comply with M303.
-
68.101(c)(5)(E) Signage at toilet rooms or bathrooms
(E) Signage at toilet rooms or bathrooms shall comply with TAS 703. Toilet rooms or bathrooms serving the leased area which are not accessible shall be provided with signage...
-
68.101(c)(5)(B) Accessible route from parking area(s)
(B) An accessible route from the parking area(s) shall comply with TAS 206 and 402.
-
§ 37.91 Wheelchair locations and food service on intercity rail trains
[See subsections ...]
-
11B-703.4.1 Height above finish floor or ground
Tactile characters on signs shall be located 48 inches (1219 mm) minimum above the finish floor or ground surface, measured from the baseline of the lowest Braille cells and 60 inches (1524...
-
11B-703.4.1 Height above finish floor or ground
Tactile characters on signs shall be located 48 inches (1219 mm) minimum above the finish floor or ground surface, measured from the baseline of the lowest Braille cells and 60 inches (1524...
-
208 Parking Spaces
that accommodate vans (208.2.4) relocation of requirements for signage to the scoping section on signs (216.5) Section 208.1 exempts spaces used exclusively for buses, trucks, other...
-
5. Edge Protection
The Access Board sought public input with question 30 in the MDE NPRM preamble, on whether there is diagnostic equipment with wheelchair spaces on raised platforms that does not provide...
-
11B-410.8 Restriction sign
A sign complying with Section 11B-703.5 _|Signs; Visual Characters|_ shall be posted in a conspicuous place at each landing and within the platform enclosure stating “No Freight” and include...
-
11B-410.8 Restriction sign
A sign complying with Section 11B-703.5 _|Signs; Visual Characters|_ shall be posted in a conspicuous place at each landing and within the platform enclosure stating “No Freight” and include...
-
703.4.1 Height above Finish Floor or Ground
Tactile characters on signs shall be located 48 inches (1220 mm) minimum above the finish floor or ground surface, measured from the baseline of the lowest tactile character and 60 inches...
-
11B-904.3.4 Identification sign
When not all check-out aisles are accessible, accessible check-out aisles shall be identified by a sign clearly visible to a person in a wheelchair displaying the International Symbol of...
-
11B-904.3.4 Identification sign
When not all check-out aisles are accessible, accessible check-out aisles shall be identified by a sign clearly visible to a person in a wheelchair displaying the International Symbol of...
-
11B-904.3.4 Identification sign
When not all check-out aisles are accessible, accessible check-out aisles shall be identified by a sign clearly visible to a person in a wheelchair displaying the International Symbol of...
-
ADA & Level Boarding Guidance - Platform Height
49 CFR §§37.41-43; 37.9(a), (d); 49 CFR Part 37, App. A (810.5.3) DECEMBER 14, 2011
-
AXS Map App - Find, Rate and Share Accessible Places
Amazingly simple to use. On web and mobile. Created by Jason DaSilva and the AXS Lab team. Find Use our app or web site to find accessible places in your area. Browse for...
-
405.5 Clear Width
405.5 Clear Width. The clear width of a ramp run and, where handrails are provided, the clear width between handrails shall be 36 inches (915 mm) minimum....
-
A. Passenger Drop-Off Areas
An accessible drop-off area must have a level access aisle that is adjacent and parallel to the vehicle space....
-
Seton EZ-Roll Sign Stanchion Systems - Parking Sign PP244
Grab the nylon loop handle and roll sign smoothly along on the wheels at the base Fill the 24" base with sand or water to withstand wind gusts of up to 40 mph Weather-resistant...
-
11B-812.10.4 Location
EV chargers shall be adjacent to, and within the projected width of, the vehicle space being served....
-
Identification Signs: ADA Standard Section 216.9.1
Section 216.9.1 covers scoping requirements in the current ADA Standards for TTY identification signs.
-
11B-703 Signs
[See subsections ...]
-
11B-216 Signs
[See subsections ...]
