Flight-related services mean functions related to air travel including, but not limited to, ticket purchase, rebooking cancelled flights, seat selection, and obtaining boarding passes or...
Search Results "Patient Seated in Wheelchair"
-
§382.3 Flight-related services
-
§382.65(c)(2)
(2) The chair must be designed to be compatible with the maneuvering space, aisle width, and seat height of the aircraft on which it is to be used, and to be easily pushed, pulled, and turned...
-
903.3 Size
Benches shall have seats that are 42 inches (1065 mm) long minimum and 20 inches (510 mm) deep minimum and 24 inches (610 mm) deep maximum....
-
405.1 General
EXCEPTION: In assembly areas, aisle ramps adjacent to seating and not serving elements required to be on an accessible route shall not be required to comply with 405....
-
405.1 General
EXCEPTION: In assembly areas, aisle ramps adjacent to seating and not serving elements required to be on an accessible route shall not be required to comply with 405....
-
903.3 Size
Benches shall have seats that are 42 inches (1065 mm) long minimum and 20 inches (510 mm) deep minimum and 24 inches (610 mm) deep maximum....
-
§ 382.3 Flight-related services
Flight-related services mean functions related to air travel including, but not limited to, ticket purchase, rebooking cancelled flights, seat selection, and obtaining boarding passes or...
-
11B-903.3 Size
Benches shall have seats that are 48 inches (1219 mm) long minimum and 20 inches (508 mm) deep minimum and 24 inches (610 mm) deep maximum....
-
§ 36.302(f)(5)(i)(C)
(C) When all non-accessible tickets in a designated price category have been sold and the tickets for accessible seating are being released within the same designated price category....
-
903.2 Clear Floor or Ground Space
Clear floor or ground space complying with 305 shall be provided and shall be positioned at the end of the bench seat and parallel to the short axis of the bench....
-
903.3 Size
Benches shall have seats that are 42 inches (1065 mm) long minimum and 20 inches (510 mm) deep minimum and 24 inches (610 mm) deep maximum....
-
68.10(12) Element
., telephone, curb ramp, door, drinking fountain, seating, water closet, or public right-of-way....
-
§ 35.138(e)(1)(iii)
(iii) When all non-accessible tickets in a designated price category have been sold and the tickets for accessible seating are being released within the same designated price category....
-
11B-903.3 Size
Benches shall have seats that are 48 inches (1219 mm) long minimum and 20 inches (508 mm) deep minimum and 24 inches (610 mm) deep maximum....
-
ADA Checklist: Health Care Facilities and Service Providers
The purpose of this pamphlet is to provide practical, cost-effective solutions concerning access to services and facilities by your patients who are blind, deaf-blind, or visually impaired...
-
Section 35.137 Mobility devices. (Section-by-Section Analysis)
Section 35.137 set forth specific requirements for the accommodation of ‘‘mobility devices,'' including wheelchairs, manually-powered mobility aids, and other power-driven mobility devices...
-
1018.4 Clear Width
Where gates or barriers are installed to control access to beaches, the gates or barriers should permit the passage of beach wheelchairs....
-
Error/Omission: The built-up curb ramp projects into the access aisle.
Result: When an access aisle has a sloped surface, a wheelchair may roll away from a car or van preventing the wheelchair user from getting out of the vehicle....
-
1131A.2 Changes greater than ½ inch
level greater than ½ inch (12.7 mm) shall be made by means of a sloped surface not greater than 1 unit vertical in 20 units horizontal (5-percent slope), or a ramp, elevator or platform (wheelchair...
-
1131A.2 Changes greater than ½ inch
level greater than ½ inch (12.7 mm) shall be made by means of a sloped surface not greater than 1 unit vertical in 20 units horizontal (5-percent slope), or a ramp, elevator or platform (wheelchair...
-
903.6 Structural Strength
Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the seat, fastener, mounting device, or...
-
1009.2.8 Submerged Depth
The lift shall be designed so that the seat will submerge to a water depth of 18 inches (455 mm) minimum below the stationary water level....
-
Submerged Depth
Submerged Depth Lifts must be designed so that the seat will submerge to a minimum of 18 inches below the stationary water level....
-
903.6 Structural Strength
Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the seat, fastener, mounting device, or...
