Strength: Bars with a 1 1/2" offset clearance will support loads in excess of 900lbs when properly installed....
Search Results "Hinge Side Clearance"
-
AJW Architectural Products UG30-A Series UG30-A12 12" Concealed Set Screw Flange, 1.5" Diameter Grab Bar - Configuration A
-
AJW Architectural Products UG20-A Series UG20-A12 12" Concealed Set Screw Flange, 1.25" Diameter Grab Bar - Configuration A
Strength: Bars with a 1 1/2" offset clearance will support loads in excess of 900lbs when properly installed....
-
Activar Hiawatha HG111 & HG112 Straight Tubular Pulls and HG113 & HG114 Push Bars
Brass, Bronze, Stainless Steel Pull Diameter: 1-1/4" CTC: 12", 18", 27-3/4", 33" Overall: 13-3/4", 19-1/4", 29" Push Bar, 34-1/4" Push Bar Projection: 3", 3", 2-1/2", 2-1/2" Clearance...
-
Door King Inc. 1150 Overhead Gate and Door opener
Low profile ideal for low clearance underground parking areas Shock mounts greatly reduce noise and vibration from being transferred into above offices or apartments Direct drive limit...
-
Lutron Sivoia QED Kirbé Vertical Motorized Drapery System
An industry first, the Kirbé vertical drapery system smoothly pulls fabric up and completely out of the way - unlike traditional draperies that move from side-to-side....
-
Bobrick ClassicSeries LiquidMate Wall-Mounted Soap Dispenser B-155 Elevations
Requires the Premium User plan or above. (Login or upgrade your account!) -
AJW Architectural Products U169 Series Lever Operated, Roll Towel Dispenser - Surface Mounted
Hinge: Full length, heavy duty, stainless steel Overall Size: 12 1/4"W x 16"H x 10 1/2"D 311mm x 406mm x 267mm Capacity: One standard size roll of 8†or 9†wide....
-
Ampetronic CLS2 Wall Mount Perimeter Induction Loop Driver Hearing System
All connections and controls are secured behind a tamper resistant, hinged, detachable cover....
-
Allegion Von Duprin 55 Series Cross Bar Exit Devices
1018mm) at center Crossbar projection — neutral 3 3/4" (95mm), depressed 2 3/8" (60mm) Crossbar length 42" (1067mm) Lock stile case 7 1/4" x 1 3/16" x 2 1/4" (184mm x 30mm x 57mm) Hinge...
-
Bobrick Charting Station/Shelf B-7816
Desk secured to cabinet with a full-length stainless steel piano-hinge....
-
Accessible Boat Slips
Other accessible slips can be located perpendicular to the end of the pier with clearance extending the width of the slip....
-
Grab bars
When two grab bars are provided there should be at least a 24-inch clearance between them....
-
Minimum Number [9.1.2 and 9.1.3]
NOTE *minimum door clearance required in all sleeping rooms and suites FACILITY TOTAL VISUAL APPLIANCES ONLY Total MOBILITY ACCESS & VISUAL APPLIANCES Total...
-
Guidelines for Requirement 2
vertical height requirement at passenger loading zones as the minimal vertical clearance for garage parking....
-
11B-221.2.3.2 Vertical dispersion
Vertical, center, or side aisles adjoining bleacher seating that are stepped or tiered are not considered entry points. Advisory 11B-221.2.3.2 Vertical dispersion Exception 2. ...
-
Issue 5: Tactile arrow (in line)
If the needed adjustment is minor, it may be possible to shim behind one side of the device to align the arrow with the crosswalk....
-
1117B.1, Item 5
The bubbler shall be activated by a manually operated system complying with Section 1117B.6, Item 4 that is front mounted or side mounted and located within 6 inches (152mm) of the front...
-
1117B.1, Item 4
The bubbler shall be activated by a manually operated system complying with Section 1117B.6, Item 4 that is front mounted or side mounted and located within 6 inches (152mm) of the front...
-
1012.3 Opening limitations
Exceptions: The triangular openings formed by the riser, tread and bottom rail at the open side of a stairway shall be of a maximum size such that a sphere of 6 inches (152 mm)...
-
Wheelbase Definition
The larger of the dimensions measured on the right and left side of the mobility device were considered for the analysis....
-
2. Armrests Requirement
commenter that addressed whether armrests should be required was a manufacturer who requested that beds, cots, and stretchers be excluded from the requirements as they are required to have side...
-
F235.2 Boat Slips
For example, a single pier 25 feet (7620 mm) long and 5 feet (1525 mm) wide (the minimum width specified by 1003.3) allows boats to moor on three sides....
-
R305 Detectable Warning Surfaces (Section-by-Section Analysis)
At curb ramps and blended transitions, detectable warning surfaces must extend the full width of the ramp run (excluding flared sides), blended transition, or turning space....
-
235.2 Boat Slips
For example, a single pier 25 feet (7620 mm) long and 5 feet (1525 mm) wide (the minimum width specified by Section 1003.3) allows boats to moor on three sides....
