End doors and gates shall provide a clear width 32 inches (813 mm) minimum. Side doors and gates shall provide a clear width 42 inches (1067 mm) minimum....
Search Results "Seat Width"
Filters
Commonly Searched Documents
-
11B-410.6 Doors and gates
-
802.4 Designated Aisle Seats
802.4 Designated Aisle Seats. Designated aisle seats shall comply with 802.4....
-
1002.4.7 Companion Seats
Where the interior width of the amusement ride is greater than 53 inches (1345 mm), seating is provided for more than one rider, and the wheelchair is not required to be centered within...
-
1002.4.7 Companion Seats
Where the interior width of the amusement ride is greater than 53 inches (1345 mm), seating is provided for more than one rider, and the wheelchair is not required to be centered within...
-
4.13.5 Clear Width
Doorways shall have a minimum clear opening of 32 in (815 mm) with the door open 90 degrees, measured between the face of the door and the opposite stop (see Fig. 24(a), (b), (c),...
-
Clearance
The minimum width of exterior routes on public streets and sidewalks will likely be revisited in supplementary guidelines specific to public rights-of-ways that the Board intends to develop...
-
Zurn Z5958 Series Commercial White, Closed Front Toilet Seat with Cover
Z5958 Series White, Closed Front Toilet Seat with Cover....
-
5.3.3 Seats
Pit toilet seats shall comply with 5.3.3...
-
608.4 Seats
608.4 Seats. A folding or non-folding seat shall be provided in transfer type shower compartments....
-
Other Issues Relating to Seat Assignments
Other Issues Relating to Seat Assignments You must provide a seat assignment accommodation when requested by a passenger with a disability even if the seat is not otherwise available...
-
Bemis 1955CT Heavy Duty Open Front Less Cover Commercial Toilet Seat
This heavy duty open front less cover seat is ideal for any commercial application. Made from durable plastic, the seat resists chips, wears and stains....
-
608.4 Seats
A folding or non-folding seat shall be provided in transfer type shower compartments....
-
608.4 Seats
A folding or non-folding seat shall be provided in transfer type shower compartments....
-
382.87 What other requirements pertain to seating for passengers with a disability?
382.87 What other requirements pertain to seating for passengers with a disability? These provisions are essentially the same as their counterparts in the existing regulation....
-
Designated Aisle Seats
Designated Aisle Seats....
-
4.3.5.3 180-degree turn around an obstacle
The current ADA-ABA standard for the space needed to complete maneuver is based on the width of the entry aisle and the width of the intervening obstacle, e.g. shelving....
-
802.4 Designated Aisle Seats
Designated aisle seats shall comply with 802.4....
-
802.4 Designated Aisle Seats
Designated aisle seats shall comply with 802.4....
-
Amusement Ride Seats Designed for Transfer
Amusement Ride Seats Designed for Transfer Where an amusement ride seat is designed for transfer,it is expected that someone will transfer only once from a wheelchair or mobility device...
-
3.3.5 Seat Height
Comparisons of research findings on the seat heights for power chairs and scooters showed that mean seat heights measured in the UDI study were comparable to seat heights for the power chairs...
-
Bemis 2155CT Heavy Duty Plastic Open Front Less Cover Commercial Toilet Seat
This heavy duty open front less cover seat is ideal for any commercial application. Made from durable plastic, the seat resists chips, wears and stains....
-
3.3.12 180-Degree Turn around a Barrier
3.3.12 180-Degree Turn around a Barrier The U.S. has requirements for a 180-degree turn around a barrier that makes the width of the turn-around space dependent on the width of the passageway...
-
ยง 36.304(d)(2)(iii)(L)(1)
(1) Team or player seating, section 221.2.1.4....
-
610.1 General
Seats in bathtubs and shower compartments shall comply with 610....
