In the raised position, the centerline of the seat shall be located over the deck and 16 inches (406 mm) minimum from the edge of the pool....
Search Results "Existing Swimming Pool"
-
11B-1009.2.2 Seat location
-
11B-1009.2.2 Seat location
In the raised position, the centerline of the seat shall be located over the deck and 16 inches (406 mm) minimum from the edge of the pool....
-
11B-1009.2.5 Seat width
The seat shall be 16 inches (406 mm) wide minimum.
-
1009.2.5 Seat Width
The seat shall be 16 inches (405 mm) wide minimum.
-
1009.2.5 Seat Width
The seat shall be 16 inches (405 mm) wide minimum.
-
1009.2.4 Seat Height
The height of the lift seat shall be designed to allow a stop at 16 inches (405 mm) minimum to 19 inches (485 mm) maximum measured from the deck to the top of the seat surface when...
-
1009.2.5 Seat Width
1009.2.5 Seat Width. The seat shall be 16 inches (405 mm) wide minimum.
-
11B-1009.2.5 Seat width
The seat shall be 16 inches (406 mm) wide minimum.
-
11B-1009.2.4 Seat
The seat shall be rigid and shall have a back support that is at least 12 inches (305 mm) tall. The height of the lift seat shall be designed to allow a stop at 17 inches (432 mm)...
-
11B-1009.2.5 Seat width
The seat shall be 16 inches (406 mm) wide minimum.
-
11B-1009.2.4 Seat
The seat shall be rigid and shall have a back support that is at least 12 inches (305 mm) tall. The height of the lift seat shall be designed to allow a stop at 17 inches (432 mm)...
-
F202.2.4 Public Telephone
Where a public telephone is not provided in an addition but is provided in the existing building or facility to serve the addition, at least one public telephone in the existing building...
-
15. Can I store my lift and bring it out only when it is requested by a person with a disability?
A pool lift must remain in place and be operational during all times that the pool is open to guests....
-
202.1 General
Additions and alterations to existing buildings or facilities shall comply with 202....
-
11B-202.1 General
Additions and alterations to existing buildings or facilities shall comply with Section 11B-202. ...
-
202.1 General
Additions and alterations to existing buildings or facilities shall comply with 202....
-
11B-202.1 General
Additions and alterations to existing buildings or facilities shall comply with Section 11B-202....
-
11B-202.1 General
Additions and alterations to existing buildings or facilities shall comply with Section 11B-202....
-
§1630.2(o)(2)(i)
(i) Making existing facilities used by employees readily accessible to and usable by individuals with disabilities; and...
-
11B-216.7 Elevators
Where existing elevators do not comply with Section 11B-407, elevators complying with Section 11B-407 shall be clearly identified with the International Symbol of Accessibility complying...
-
11B-216.7 Elevators
Where existing elevators do not comply with Section 11B-407, elevators complying with Section 11B-407 shall be clearly identified with the International Symbol of Accessibility complying...
-
R202 Alterations and Elements Added to Existing Facilities (Section-by-Section Analysis)
R202 Alterations and Elements Added to Existing Facilities (Section-by-Section Analysis) The proposed guidelines apply to alterations and elements added to existing facilities....
-
4.1.5(1) ENTRANCES
If a new addition to a building or facility does not have an entrance, then at least one entrance in the existing building or facility shall comply with 4.1.4, Entrances....
-
§ 35.150(b)(5)(i)
(i) Where an existing play area has less than 1000 square feet, it shall be exempt from the provisions of section 240 of the proposed standards;...