(ii) It is located within the area of an auditorium in which the vertical viewing angles (as measured to the top of the screen) are from the 40th to the 100th percentile of vertical viewing...
Search Results "Hazardous Vehicular Area"
-
§ 35.151(g)(4)(ii)
-
§ 37.42(e)(2)
mini-high platform or where the physical structure of an existing station does not allow such clearance), barriers must be used to prevent the flow of pedestrian traffic through these narrower areas...
-
505.3 Continuity
EXCEPTION: In assembly areas, handrails on ramps shall not be required to be continuous in aisles serving seating....
-
F247.4 Trail Facilities
Outdoor recreation access routes are not required at camping facilities, picnic facilities, or viewing areas provided on trails....
-
230 Two-Way Communication Systems
Where a two-way communication system is provided to gain admittance to a building or facility or to restricted areas within a building or facility, the system shall comply with 708....
-
Is there a limit on the total length (number of runs) a ramp may have?
(Ramps in play areas are limited to a 12” max. rise)....
-
11B-203.14 Raised diving boards and diving platforms
accessible route complying with Division 4 shall be provided to the ground- or floor-level entry points, where provided, of stairs, ladders, or other means of reaching the raised elements or areas...
-
§ 35.151(g)(4)(ii)
(ii) It is located within the area of an auditorium in which the vertical viewing angles (as measured to the top of the screen) are from the 40th to the 100th percentile of vertical viewing...
-
§ 37.42(e)(2)
mini-high platform or where the physical structure of an existing station does not allow such clearance), barriers must be used to prevent the flow of pedestrian traffic through these narrower areas...
-
11B-203.14 Raised diving boards and diving platforms
accessible route complying with Division 4 shall be provided to the ground- or floor-level entry points, where provided, of stairs, ladders, or other means of reaching the raised elements or areas...
-
11B-804.2.2 U-Shaped
In U-shaped kitchens enclosed on three contiguous sides, clearance between all opposing base cabinets, counter tops, appliances, or walls within kitchen work areas shall be 60 inches (1524...
-
505.3 Continuity
EXCEPTION: In assembly areas, handrails on ramps shall not be required to be continuous in aisles serving seating....
- Haws Barrier-Free Chilled Dual Wall Mount Fountain H1011.8HO
- Haws Barrier-Free Chilled Wall Mount Fountain H1001.8HPS
- Haws Barrier-Free Chilled Wall Mount Fountain H1001.8
- Wooster Products NITEGLOW® Anti-Slip Glow-In-The-Dark Safety Products
-
§382.157(c)
Data concerning a passenger's disability must be recorded separately in the following areas: vision impaired, hearing impaired, vision and hearing impaired, mentally impaired, communicable...
-
Swimming Pools
Pool walls at diving areas and in areas where swimmers cannot enter because of landscaping or adjacent structures are still counted as part of the pool’s total linear feet....
-
F228 Depositories, Vending Machines, Change Machines, and Mail Boxes
similar exception was not included in the corresponding provision for facilities covered by the ADA because such facilities are held to a different level of access with respect to work areas...
-
Accessible Routes
must comply with ADAAG provisions for the location, width (minimum of 36 inches), passing space, head room, surface, slope (maximum of 1:12 or 8.33%), changes in level, doors, egress, and areas...
-
C. Accessibility Within Toilet Rooms
Is there an area within the toilet room where a person who uses a wheelchair or mobility device can turn around - either a minimum 60-inch diameter circle or a “T”-shaped turn area?...
-
Multi-tasking
computer while talking on phone) Identify tasks that must be performed simultaneously and tasks that can be performed individually Provide specific feedback to help employee target areas...
-
11B-1002.4.3 Gaps
Floors of amusement rides with wheelchair spaces and floors of load and unload areas shall be coordinated so that, when amusement rides are at rest in the load and unload position, the vertical...
-
A. Finish and Contrast
Contrast in percent shall be determined by: Contrast=[B−B)/B] × 100 Where B = light reflectance value (LRV) of the lighter area and B = light reflectance value (LRV) of the darker...