EXCEPTION: In instances of alteration work where provision of a standard stall (Fig. 30(a)) is structurally impracticable or where plumbing code requirements prevent combining existing stalls...
Search Results "Fire and Safety Standard"
Commonly Searched Documents
-
4.1.6(4)(e)
-
Construction and Manufacturing Tolerances
The ADA Standards recognize conventional industry tolerances for dimensions not expressed as a range. This applies to field work, not design work....
-
Are detectable warnings required on curb ramps or at hazardous vehicular areas?
Under the ADA Standards, which apply primarily to facilities located on sites, detectable warnings are required at transit facilities (at curb ramps and along open drop-offs of rail station...
-
D. Suites:
Should any of these suites later be marketed or sold to the public on a season basis, PSE shall make the suites (including the toilet rooms) accessible in compliance with the 2010 Standards...
-
New Construction. (Section-by-Section Analysis)
The NPRM did not expressly propose that new construction of correctional and detention facilities shall comply with the proposed standards because the Department assumed it would be clear...
-
11B-608.2.2.1 Clearance
[2010 ADA Standards] 608.2.2.1 Clearance....
-
11B-813 Adult changing facilities
ETA Editor's Note Adult changing facilities are not addressed by 2010 ADA Standards, although a case could be made, based on the general obligation for governments to make their services...
-
Substantially Limited in Working
regarded as substantially limited in working because her job of sewing machine operator was not a “broad class of jobs”; she would now be protected under the third prong because she was fired...
-
3. New Construction vs. Alterations
The requirements in the ADA Standards for curb ramps newly constructed post-ADA (construction commenced after January 26, 1992) can be found in § 4.7....
-
11B-232.1 General
Access Board's Note to Reader: The Department of Justice’s ADA standards also require the following: Detention and correctional facilities....
-
11B-232.1 General
Access Board's Note to Reader: The Department of Justice’s ADA standards also require the following: Detention and correctional facilities....
- TownSteel FME4020 Mortise Lockdown Clutched Trim
- TownSteel FCE4030 Cylindrical Lockdown Rigid Trim Security Cylinder RFID Cylindrical
- TownSteel FME4010 Mortise Lockdown Rigid Trim RFID Mortise
- TownSteel FME4030 Mortise Lockdown Rigid Trim Security Cylinder
- Grohe Allure F-digital Basin Mixer Faucet
- Grohe Veris F-digital Basin Mixer Faucet
-
§382.57(c)(8) Braille instructions
Braille must comply with section 703.3 of the 2010 ADA Standards....
-
6.7
6.7 Cinemark shall provide at least the minimum number of wheelchair spaces required in each auditorium as set forth in § 4.1.3(19)(a) of the ADA Standards....
-
d. i.
See Standards § 4.16.2....
-
Doors
See Standards § 4.13.6....
-
§27.71(k)(8) Braille instructions.
Braille must comply with section 703.3 of the 2010 ADA Standards....
-
§27.71(e)
(e) The Americans with Disabilities Act Accessibility Guidelines (ADAAGs), including section 10.4 concerning airport facilities, shall be the standard for accessibility under this section...
-
§ 27.71(k)(8) Braille instructions
Braille must comply with section 703.3 of the 2010 ADA Standards....