Ensure that students with disabilities are educated with students without disabilities to the maximum extent appropriate....
Search Results "Expected Maximum Flight Duration"
-
Public Elementary and Secondary Schools
- Panda S.12 Solid Wood Lift & Slide System
- Corada's ADA Product Certification FAQs
-
REMEDIAL ACTION
Thereafter, for the duration of this Agreement, H&R Block, H&R Block Tax Services, and HRB will include ADA training, including instruction on the Policy, in their orientation training...
-
Appendix D: Photometric Measurements
recorded on each trial, however, a simple software program running on the tablet PC also recorded horizontal illuminance readings and times at a rate of one reading per two seconds for the duration...
-
3.9 The Undue Hardship Limitation
In general, a larger employer would be expected to make accommodations requiring greater effort or expense than would be required of a smaller employer....
-
Section 1630.9 Not Making Reasonable Accommodation
Thus, an employer would not be expected to accommodate disabilities of which it is unaware....
-
Section 1193.33 Information, documentation and training [1193.25 in the NPRM] (Section-by-Section Analysis)
While the user's preference is first priority, manufacturers are not expected to stock copies of all materials in all possible alternate formats and may negotiate with users to supply information...
-
Executive Summary
This number is expected to grow to more than 50 million by year 2020....
-
Closing
And as I was sitting here I said, you know I’m going to expect you to do this one, and she said, oh no I’m all excited about this....
-
Study Limitations
It's possible that due to a women's longer life expectancy that the census statistic is skewed towards including more older women (over 65) who would not likely be actively transferring...
-
Comments to the NPRM
A smaller number of commenters asked for additional guidance on expectations under a reasonable modification rule or for clarification of an enforcement mechanism for the proposed requirement...
-
Section 37.165 Lift and Securement Use
cables, pulleys, and shafts, must have a safety factor of at least six times the design load; nonworking parts such as the platform, frame, and attachment hardware, which would not be expected...
-
Equipment and furniture. (Section-by-Section Analysis)
The Department expects to undertake a rulemaking to address these issues in the near future....
-
Section 37.165 Lift and Securement Use
cables, pulleys, and shafts, must have a safety factor of at least six times the design load; nonworking parts such as the platform, frame, and attachment hardware, which would not be expected...
-
1011.2.1 Size and Location
recreation access route or trail, as applicable, or another clear ground space Locate the space so that the water spout is 11 inches (280 mm) minimum and 12 inches (305 mm) maximum...
-
Volume Control
The ANSI A117.1 standard requires certain public pay telephones to provide 12 decibels of gain minimum and up to 20 decibels maximum and that an automatic reset be provided....
-
Accessible Route
For example, where the total length of a gangway or series of gangways serving as an accessible route is 80 feet or more an exception permits the slope on gangways to exceed the maximum...
-
M102.1 Defined Terms (Section-by-Section Analysis)
defined: health care provider, breast platform, patient support surface, transfer supports, positioning supports, prone position, supine position, examination tables, diagnostic purposes, maximum...
-
(1) Adjustability: Minimum High Transfer Height
Therefore, transfer surfaces that are adjustable to a 25-inch maximum during patient transfer accommodate most patients who use mobility devices....
-
M303.2.4 Equipment Clearances (Section-by-Section Analysis)
to clarify that the measurement is taken from the toe end of the wheelchair space. 10 The Wheeled Mobility Anthropometry Project recommended a toe clearance that is 5 inches deep maximum...
-
(C) NYCT’s interpretation of the ADA and DOT’s implementing regulations is too narrow.
facility,” for the reasons set forth above, DOT’s regulations (specifically, 49 CFR § 37.43(a)(1)) expressly require that the public entity shall make the alteration “in such a manner, to the maximum...
-
M301.4.2 Clearance Around Base (Section-by-Section Analysis)
The width of the base permitted within this clearance would be 26 inches maximum at the edge of the examination surface and was permitted to increase at a rate of 1 inch in width for every...
-
Clear Ground Space [1011.2]
Locate the clear space so that the water spout is a minimum of 11 inches and a maximum of 12 inches from the rear center of the long side of the space....