The intended scope of work and technical feasibility are key factors in determining compliance in alterations to existing elevators....
Search Results "Work Surface"
-
Alterations [4.1.6(1)(f) & (k)]
-
Introduction
TransCen’s work represents the intersection of grassroots implementation and national policy and initiatives....
-
36. Must an employer provide a reasonable accommodation for an employee with a disability who violated a conduct rule that is job- related for the position in question and consistent with business necessity?
The individual then explains that he was late because of a disability and needs to work on a later schedule....
-
VI. REPORTING AND MONITORING
Kaiser shall provide written reports on a quarterly basis to Plaintiffs’ Counsel and the third-party Facilitator regarding work performed to implement this Agreement....
-
11B-707.7.1.1 Vertically mounted display screen
no more than 30 degrees tipped away from the viewer, the center line of the display screen and other display devices shall be no more than 52 inches (1321 mm) above the floor or ground surface...
-
6.5
6.5 Each wheelchair space shall comply with the size requirements set forth in § 4.33.2 of the Standards, be level and satisfy the floor surface requirements as set forth in § 4.33.4...
-
11B-247.1.2.5 Hazardous vehicular areas
If a walk crosses or adjoins a vehicular way, and the walking surfaces are not separated by curbs, railings or other elements between the pedestrian areas and vehicular areas, the boundary...
-
11B.707.7.1.2 Angle-mounted display screen
degrees and 60 degrees tipped away from the viewer, the center line of the display screen and other display devices shall be no more than 44 inches (1118 mm) above the floor or ground surface...
-
R409.7.2 Non-Circular Cross Sections
Handrail gripping surfaces with a non-circular cross section shall have a perimeter dimension of 100 mm (4 in) minimum and 160 mm (6.25 in) maximum, and a cross-section dimension of 57 mm...
-
F2
If there is a built-in reception or other type of counter, does it have a section that is at least three feet long that is no higher than 36 inches above the floor or is there a nearby surface...
-
2.9 Protruding Objects
including signs, water sources, and so forth shall not extend into the space above an ORAR more than 4 inches (100 mm) if they are between 27 inches (685 mm) and 80 inches (2030 mm) above the surface...
-
4.19.2 HEIGHT AND CLEARANCES
Lavatories shall be mounted with the rim or counter surface no higher than 34 in (865 mm) above the finished floor....
-
6.11 Protruding Objects
features, including signs, shall not extend into the space above a beach access route more than 4 inches (100 mm) if they are between 27 inches (685 mm) and 80 inches (2030 mm) above the surface...
-
Assumptions
For the purpose of this study, it was assumed that: A Rotational Penetrometer can be used to determine firmness and stability for trail surfaces as they relate to accessibility...
-
4.5.6 Openings
Openings in the clear floor or ground space surface shall not allow passage of a sphere more than 1/2 inch (13 mm) diameter....
-
4.6.7 Openings
Openings in the clear floor or ground space surface shall not allow passage of a sphere more than 1/2 inch (13 mm) diameter....
-
11B-247.1.2.5 Hazardous vehicular areas
If a walk crosses or adjoins a vehicular way, and the walking surfaces are not separated by curbs, railings or other elements between the pedestrian areas and vehicular areas, the boundary...
-
SIDEWALK
A surfaced pedestrian way contiguous to a street used by the public. (As differentiated from the definition of “Walk”.) Advisory Definition of SIDEWALK....
-
11B.707.7.1.1 Vertically mounted display screen
or tipped away from the viewer less than 30 degrees, the center line of the display screen and other display devices shall be no more than 52 inches (1321 mm) above the floor or ground surface...
-
SIDEWALK
A surfaced pedestrian way contiguous to a street used by the public. (As differentiated from the definition of “Walk”.) Advisory Definition of SIDEWALK....
-
B. The ADA Standards for Accessible Design
, accessible entrances, usable bathrooms and water fountains, accessibility of public and common use areas, and access to the goods, services, programs, facilities, accommodations, and work...
-
Robots invade the GlobalNOC at IU
The GlobalNOC at IU uses telepresence robots to ensure that staff members working remotely can still be an integral part of the team....
-
Inclusion Solutions BigBell™ Alert System
BigBell for is easy to install and will work for any kind of public building or business....
-
M303.2.2 Width
EXCEPTION: Wheelchair spaces located on raised platforms shall be permitted to be 32 inches (815 mm) wide minimum to a height of 4 inches (100 mm) measured from the platform surface....
