courses to be accessible and connected to an accessible route (which must connect the last accessible hole directly to the course entrance or exit); generally, the accessible holes would have...
Search Results "Regarded as Having an Impairment"
-
Miniature golf courses. (Section-by-Section Analysis)
-
POWER DISRUPTION RESPONSE
However, people should have an emergency plan that includes stockpiling food, water, and supplies for at least seven days. WHAT CAN I DO IF I DEPEND ON LIFE SUSTAINING EQUIPMENT?...
-
704.11.1 Parapet construction
Parapets shall have the same fire-resistance rating as that required for the supporting wall, and on any side adjacent to a roof surface, shall have noncombustible faces for the uppermost...
-
Miniature golf courses. (Section-by-Section Analysis)
courses to be accessible and connected to an accessible route (which must connect the last accessible hole directly to the course entrance or exit); generally, the accessible holes would have...
-
Controlled Descent Devices (cables and chutes)
A number of unique escape devices have been developed over the years. These include controlled descent devices of various types....
-
§ 38.125(d)(2) Wheelchair or mobility aid spaces
Spaces for persons who wish to remain in their wheelchairs or mobility aids shall have a minimum clear floor space 48 inches by 30 inches....
-
1132A.9 Smooth surface
Swinging door or gate surfaces within 10 inches (254 mm) of the finish floor or ground measured vertically shall have a smooth surface on the push side extending the full width of the door...
-
§ 38.95(d) Mobility aid seating location
Spaces for persons who wish to remain in their wheelchairs or mobility aids shall have a minimum clear floor space 48 inches by 30 inches....
-
11B-1009.2.4 Seat
The seat shall be rigid and shall have a back support that is at least 12 inches (305 mm) tall....
-
1132A.9 Smooth surface
Swinging door or gate surfaces within 10 inches (254 mm) of the finish floor or ground measured vertically shall have a smooth surface on the push side extending the full width of the door...
-
11B-1009.2.4 Seat
The seat shall be rigid and shall have a back support that is at least 12 inches (305 mm) tall....
- WonderBaby.org
-
405.7.4 Change in Direction
Ramps that change direction between runs at landings shall have a clear landing 60 inches (1525 mm) minimum by 60 inches (1525 mm) minimum....
-
703.6.1 Pictogram Field
Pictograms shall have a field height of 6 inches (150 mm) minimum. Characters and braille shall not be located in the pictogram field. Figure 703.6.1 Pictogram Field...
-
§382.11(b)
(b) As an indirect carrier, you must comply with §§382.17 through 382.157 of this part when providing facilities or services to passengers that would have otherwise been provided by a direct...
-
12101(a)(6)
(6) census data, national polls, and other studies have documented that people with disabilities, as a group, occupy an inferior status in our society, and are severely disadvantaged socially...
-
220 Automatic Teller Machines and Fare Machines
No substantive changes have been made to the scoping provisions for automatic teller machines and fare machines....
-
Doors and hardware
• Minimum-weight doors with accessible hardware are easily opened by people who have arthritis or use a cane for extra balance....
-
R407.6.4 Change in Direction
Ramps that change direction between runs at landings shall have a clear landing 1.5 m (5.0 ft) minimum by 1.5 m (5.0 ft) minimum....
-
R404.2 Surfaces
Surfaces of clear spaces shall comply with R302.7 and shall have a running slope consistent with the grade of the adjacent pedestrian access route and cross slope of 2 percent maximum....
-
§ 36.406(d)(1)
(1) In sleeping rooms with more than twenty-five beds covered by this section, a minimum of five percent (5%) of the beds shall have clear floor space complying with section 806.2.3....
-
General Issues
This section briefly introduces topics that are noteworthy because they are new to the title III regulation or have been the subject of considerable attention or comment....
-
711.4.4 Ducts and air transfer openings
Penetrations of horizontal assemblies by ducts and air transfer openings that are not required to have dampers shall comply with this section....
-
§ 35.151(e)(1)
(1) In sleeping rooms covered by this section with more than twenty-five beds, five percent (5%) minimum of the beds shall have clear floor space complying with section 806.2.3....