Editor's Note: From DSA's "Summary of New and Amended 2025 California Building Code (CBC) Regulations for Accessibility in the Triennial Code Cycle: "Requirements for detectable warning surfaces...
Search Results "Hybrid Surface System"
-
11B-705.1.2.5 Blended transitions
-
Bonded Beach Path Installation
The two binder systems used to fabricate the beach path surface were an acrylic and polyvinyl acetate polymer emulsion, SoilSement (Midwest Industrial, Canton, Ohio), mixed 30%...
-
Accessible Routes
Technical provisions address the width, slope, and surface of both ground level and elevated accessible routes....
-
809.2 Residential Dwelling Units with Mobility Features
809.2 Residential Dwelling Units with Mobility Features As discussed below, the final rule adds technical requirements to this section for floor surfaces, bedrooms, and weather alert...
-
Some existing measurement protocols
Some existing measurement protocols Currently there are no generally accepted measurement protocols for determining the slope, flatness, or waviness of floor surfaces in terms of accessibility...
-
SafePath: ADA Entry Level Landing Installation Training Video
Modifying vertical rises at door thresholds often requires more than just a ramp, it requires a level-landing, otherwise known as maneuverable clearance area, a firm and stable level surface...
-
Ramp
A walking surface that has a running slope steeper than 1:20....
-
11B-707.9.1 General
Point-of-sale systems that include a video touch screen or any other non-tactile keypad shall be equipped with either of the following:...
-
11B-707.9.1 General
Point-of-sale systems that include a video touch screen or any other non-tactile keypad shall be equipped with either of the following:...
-
Waviness Index
Index, ASTM E 1486, Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria, was developed in response to the discovery that the F number system...
-
Re: American Specialties 9014 Surface Mounted Horizontal Baby Changing Station
Rejected this after installation. The design of the hand hold is completely sloped at about 45 degrees. My fingers slipped off unless I applied tremendous pinching force to operate....
-
Detectable Warnings: ADA Standard Section 705
Detectable warnings shall consist of a surface of truncated domes and shall comply with 705....
-
Walk
An exterior prepared surface for pedestrian use, including pedestrian areas such as plazas and courts....
-
General: ADA Standard Section 705.1
Detectable warnings shall consist of a surface of truncated domes and shall comply with 705....
-
GRADE BREAK
[DSA-AC] The line where two surface planes with different slopes meet....
-
TRANSITION PLATE
[DSA-AC] A sloping pedestrian walking surface located at the end(s) of a gangway....
-
TRANSITION PLATE
[DSA-AC] A sloping pedestrian walking surface located at the end(s) of a gangway....
-
GRADE BREAK
[DSA-AC] The line where two surface planes with different slopes meet....
-
Height Above Finish Floor or Ground: ADA Standard Section 703.4.1
Tactile characters on signs shall be located 48 inches (1220 mm) minimum above the finish floor or ground surface, measured from the baseline of the lowest tactile character and 60 inches...
-
11B-405.9.2 Curb or barrier
or barrier shall be provided that prevents the passage of a 4-inch (102 mm) diameter sphere, where any portion of the sphere is within 4 inches (102 mm) of the finish floor or ground surface...
-
11B-801.1 Scope
For example, Section 11B-806 addresses guest rooms in transient lodging facilities while Section 11B-902 contains the technical specifications for dining surfaces....
-
11B-405.9.2 Curb or barrier
or barrier shall be provided that prevents the passage of a 4-inch (102 mm) diameter sphere, where any portion of the sphere is within 4 inches (102 mm) of the finish floor or ground surface...
-
11B-801.1 Scope
For example, Section 11B-806 addresses guest rooms in transient lodging facilities while Section 11B-902 contains the technical specifications for dining surfaces....
-
Mary Ann Hay, IALD, LEED AP, Vice President, Director, Architectural Lighting Design, Syska Hennessy Group, Inc.
Light reflecting from highly reflective surfaces. Windows. Skylights....
