Clearance between handrail gripping surfaces and adjacent surfaces shall be 38 mm (1.5 in) minimum....
Search Results "Fire-Building Surface"
Filters
Commonly Searched Documents
-
R409.5 Clearance
-
11B-233.3.4.3 Alterations to residential dwelling units with adaptable features
The building standards for residential dwelling units with adaptable features do not apply to the alteration, repair, rehabilitation or maintenance of residential dwelling units constructed...
-
Sec. 469.003(d)
(d) If any portion of a building described by Subsection (a)(1) is occupied solely for residential use and the remaining occupied portion of the building is occupied for nonresidential use...
-
Acknowledgements
Acknowledgements The National Trail Surfaces Study has taken a number of turns over the past several years....
-
Stabilizer
the surface....
-
§100.201 Ground floor
Ground floor means a floor of a building with a building entrance on an accessible route. A building may have more than one ground floor....
-
How is slip resistance measured?
The coefficient of friction between the two surfaces is the ratio of the horizontal and vertical forces required to move one surface over another to the total force pressing the two surfaces...
-
PERMIT
An official document or certificate issued by the building official that authorizes performance of a specified activity. Advisory Definition of PERMIT....
-
Features of Accessible Exam Tables
Removable/adjustable support rails with continuous gripping surfaces 2. 30” X 48” minimum clear floor space adjacent to exam table and adjoining accessible route 3....
-
11B-407.4.10.1 Location
Clearance between support rails and adjacent surfaces shall be 1½ inches (38 mm) minimum....
-
Cross Slope [1016.7.2]
Cross slope is the side-to-side slope of the surface of an ORAR....
-
§27.71(k)(6)(iv)(A) Contrast.
Function keys must contrast visually from background surfaces. Characters and symbols on key surfaces must contrast visually from key surfaces....
-
§ 27.71(k)(6)(iv)(A) Contrast
Function keys must contrast visually from background surfaces. Characters and symbols on key surfaces must contrast visually from key surfaces....
-
11B-707.6.1 Input controls
Where provided, key surfaces not on active areas of display screens, shall be raised above surrounding surfaces....
-
11B-707.6.3.1 Contrast
Function keys shall contrast visually from background surfaces. Characters and symbols on key surfaces shall contrast visually from key surfaces....
-
Detectable Warning
A standardized surface feature built in or applied to walking surfaces or other elements to warn of hazards on a circulation path....
-
M305.2.7 Clearance
Clearance between the transfer support gripping surface and adjacent surfaces or obstructions shall be 1 ½ inches (38 mm) minimum....
-
505.5 Clearance
Clearance between handrail gripping surfaces and adjacent surfaces shall be 1 1/2 inches (38 mm) minimum....
-
505.5 Clearance
Clearance between handrail gripping surfaces and adjacent surfaces shall be 1 1/2 inches (38 mm) minimum....
-
11B-809.2.2 Turning space
For example, in kitchens, Section 11B-804.3.1 requires at least one work surface with clear floor space complying with Section 11B-306 to be centered beneath....
-
StaLok
During the testing performed in August 2007, it was noted that an individual had walked on the surface at the Wetlands dedication and left marks in the surface of a depth of approximately...
-
Ground Floor
In the final Guidelines, "ground floor" is defined as follows: "Ground floor" means a floor of a building with a building entrance on an accessible route....
-
M301.3 Transfer Supports
Section may be discontinuous (see Rationale) along the length of the Gripping Surface not exceeding 20% of the length of the gripping surface....
-
Attachment H
Attachment H: Modifications to Newly Constructed Facilities Within 1 year, the City of Waukegan will make the following modifications to Waukegan Fire Station #2: There...