Whereas the rationale for seat height in ADAAG is to provide a surface that is at or slightly below the wheelchair seat in order to accommodate a sliding transfer, the rationale in eldercare...
Search Results "Tread Surface"
-
4.16.3 Height
-
Referenced Standards [§105]
elements, including automated doors (ANSI/BHMA standards), means of egress (IBC), fire alarms (NFPA National Fire Alarm Code), elevators and platform lifts (ASME Safety Code), and play surfaces...
-
11B-308.3.1 Unobstructed
Operable parts of fuel dispensers shall be permitted to be 54 inches (1372 mm) maximum measured from the surface of the vehicular way where fuel dispensers are installed on existing curbs...
-
11B-705.1.2.3 Islands or cut-through medians
cut-through less 2 inches (51 mm) maximum on each side, placed at the edges of the pedestrian island or cut-through median, and shall be separated by 24 inches (610 mm) minimum of walking surface...
-
11B-809.10.5.1 Clear floor space
The edge of the clear floor space shall be flush with the control wall surface....
-
11B-812.7.2 Marking
The color of the borderlines, hatched lines, and letters shall contrast with that of the surface of the access aisle....
-
Trash, Recycling, and Other Essential Containers
When the surface is unpaved or not built with boards, slopes not steeper than 1:33 (3 percent) are allowed if necessary for drainage....
-
Medical Device Manufacturers
Many medical device manufacturers currently incorporate accessible features in some of their products such as patient support surfaces that are height adjustable, transfer and positioning...
- Bradley Terreon Classroom Sink TCS Series
- Rakks® Wall Mounted Standards with Rakks® Brackets
- Inclusion Solutions Model 2000 Voting Booth with Light (Hard Curtain)
- Inclusion Solutions Model 2000 Voting Booth (Hard Curtain)
- Inclusion Solutions Poll Star Voting Booth
-
Expert Report of Ken Schoonover, P.E., KMS Associates, Inc. (August 7, 2018)
., Houston, TX Sidewalks & Walkways: The designated accessible route to the entrance has surface openings greater than 1/2 inch (1991 ADA Stds 4.3.6, 4.5.4; 2010 ADA Stds 403.2...
- Excel Dryer, Inc. XLERATOR® Hand Dryers
-
1134A.5, Item 1
The edge of the clear floor space shall be flush with the control wall surface....
-
11B-1007.3.2 Golf club reach range area
This includes accessible routes provided adjacent to or, where provided, on the playing surface of the hole. FIGURE 11B-1007.3.2 GOLF CLUB REACH RANGE AREA...
-
606.3 Height
Lavatories and sinks shall be installed with the front of the higher of the rim or counter surface 34 inches (865 mm) maximum above the finish floor or ground....
-
Handrails
The handrail height must be between 34 and 38 inches to the top of the gripping surface....
-
Transfer Steps
Transfer Steps Transfer steps are level surfaces in a composite structure that can be used for transferring from different levels to access play components....
-
308.3.1 Unobstructed
Operable parts of fuel dispensers shall be permitted to be 54 inches (1370 mm) maximum measured from the surface of the vehicular way where fuel dispensers are installed on existing curbs...
-
A10.3.1(7) Route Signs
One means of making control buttons on fare vending machines usable by persons with vision impairments is to raise them above the surrounding surface....
-
Detectable Warnings [4.29]
ADAAG originally required detectable warnings on curb ramps, at areas where walking surfaces blend with vehicular ways without curb separation, railings, or other elements, and at the edges...