(section 607.2); • Recessed bathtub location permits shorter rear grab bar at water closet (section 604.5.2); • Circular turning space in room (section 603.2.1); • Required clear...
Search Results "Securement Location"
-
Plan 1A: 13-Foot Wide Accessible Guest Room
-
Plan 1B: 13-Foot Wide Accessible Guest Room
(section 607.2); • Recessed bathtub location permits shorter rear grab bar at water closet (section 604.5.2); • Circular turning space in room (section 603.2.1); • Required clear...
-
Plan 2A: 13-Foot Wide Accessible Guest Room
are provided in the bathroom: • Comparable vanity counter top space (section 806); • Standard roll-in type shower with folding seat (section 608.2.2); • Recessed roll-in shower location...
-
Plan 2B: 13-Foot Wide Accessible Guest Room
wide (section 608.2.3); • Alternate roll-in shower has a 36-inch wide entry at one end of the long side of the compartment (section 608.2.3); • Recessed alternate roll-in shower location...
-
Issue 10: Braille (right side up?)
Where the APS device includes the street name in Braille, care must be taken to install the signs in the correct location and orientation. ...
-
TICKETING
the purchase of other tickets; Accessible seating must be identified to the same level of specificity as other seats on maps, seating charts, and brochures, and, if asked, the location...
-
233.3.2.1 Facilities Other Than Those Containing Emergency Transportable Housing Units, F233.3.2.1 Facilities Other Than Those Containing Emergency Transportable Housing Units, F233.4.2.1 Facilities Other Than Those Containing Emergency Transportable Housing Units
units, the requirements of 233.3.2.1 shall apply to the total number of residential dwelling units that are constructed under a single contract, or are developed as a whole, whether or not located...
-
11B-604.5 Grab bars
installed in a toilet room for a single occupant accessed only through a private office and not for common use or public use provided that reinforcement has been installed in walls and located...
-
11B-410.1 General
Accessibility scoping requirements for elevators and lifts are located in Sections 11B-206.6 and 11B-206.7; technical requirements are located in Sections 11B-407, 11B-408, 11B-409 and 11B...
-
11B-604.5 Grab bars
installed in a toilet room for a single occupant accessed only through a private office and not for common use or public use provided that reinforcement has been installed in walls and located...
-
11B-410.1 General
Accessibility scoping requirements for elevators and lifts are located in Sections 11B-206.6 and 11B-206.7; technical requirements are located in Sections 11B-407, 11B-408, 11B-409 and 11B...
-
1010.2.12.1 Delayed egress locking system
A sign shall be provided on the door and shall be located above and within 12 inches (305 mm) of the door exit hardware: 6.3....
-
1013.4 Raised character and braille exit signs
[HCD 1-AC] Tactile exit signs shall be required at the following locations: 1....
-
11B-1002.6 Transfer devices for use with amusement rides
Where possible, designers are encouraged to locate the transfer device seat no higher than 17 to 19 inches (430 to 485 mm) above the load and unload surface....
-
11B-809.10.7.3 Reinforcement for grab bars
Where the water closet is located adjacent to lavatories, cabinets, wing walls, or privacy walls the grab bar reinforcement shall be 36 inches (914 mm) in length....
-
Outdoor Developed Areas: ADA Standard Section 9.
Review the updated information on the revisions to the ADA Standards regarding outdoor developed areas.
-
Transfer Devices for Use with Amusement Rides: ADA Standard Section 1002.6
Where possible, designers are encouraged to locate the transfer device seat no higher than 17 to 19 inches 430 to 485 mm) above the load and unload surface....
-
11B-233.3.1.2.6.1 Single building with one common (lobby) entrance
The following may only be used for determining required access to multifamily dwelling units, in a single building with one common (lobby) entrance, located on a site with difficult terrain...
-
11B-809.10.7.3 Reinforcement for grab bars
Where the water closet is located adjacent to lavatories, cabinets, wing walls, or privacy walls the grab bar reinforcement shall be 36 inches (914 mm) in length....
-
11B-1002.6 Transfer devices for use with amusement rides
Where possible, designers are encouraged to locate the transfer device seat no higher than 17 to 19 inches (430 to 485 mm) above the load and unload surface....
-
1010.2.13.1 Delayed egress locking system
A sign shall be provided on the door and shall be located above and within 12 inches (305 mm) of the door exit hardware: 6.3....
-
LaCantina Multi-slide Contemporary Clad Sliding Door System
Unique interlocking track design for added strength and structural integrity Minimal one piece handle and lock with exterior key Standard two point lock system secures...
-
Don-Jo Mfg., Inc. Commercial Kick Plates 90
Fastenerss #6 x 5/8" SMS Options MAG - magnetic backing for metal doors, SM - double face tape (scotch mount), TEK - self drilling screws, CSK - countersunk holes, Torx - security...
