[See subsections ...]
Search Results "Line Spacing (Raised)"
-
4.2 Space Allowance and Reach Ranges
-
4.2 SPACE ALLOWANCE AND REACH RANGES
[See subsections ...]
-
Application [§201]
Requirements in the standards apply to both exterior and interior spaces and elements provided on a site, usually without distinction....
-
11B.707.7.1.2 Angle-mounted display screen
Where display screens are mounted tipped away from the viewer 30 degrees to less than 60 degrees from vertical, the center line of the display screen and other display devices shall be no...
-
11B.707.7.1.2 Angle-mounted display screen
Where display screens are mounted tipped away from the viewer 30 degrees to less than 60 degrees from vertical, the center line of the display screen and other display devices shall be no...
-
FIGURE INDEX
610.3 Extent of Seat Figure 610.3.1 Rectangular Shower Seat Figure 610.3.2 L-Shaped Shower Seat Figure 611.4 Height of Laundry Compartment Opening Figure 703.2.5 Height of Raised...
-
Seat Height: ADA Standard Section 1009.2.4
height of the lift seat shall be designed to allow a stop at 16 inches (405 mm) minimum to 19 inches (485 mm) maximum measured from the deck to the top of the seat surface when in the raised...
-
Recognizing a TTY Call
Recognizing a TTY Call Where TTYs share a voice line, it is important that persons answering the phone know how to recognize a TTY call....
-
The carrier must designate priority stowage space for at least one wheelchair in the closet or other stowage area
other approved stowage area for passengers’ carry-on items of sufficient size to accommodate a folding, collapsible, or break-down wheelchair, the carrier must designate priority stowage space...
-
11B-411.2.1.4.1.2 Identification
Buttons shall be identified by raised characters and symbols, white on a black background, complying with Section 11B-703.2 and Braille complying with Section 11B-703.3....
-
11B-411.2.1.4.1.2 Identification
Buttons shall be identified by raised characters and symbols, white on a black background, complying with Section 11B-703.2 and Braille complying with Section 11B-703.3....
-
§ 37.47(b)(2)
(2) Transfer stations on a rail line or between rail lines;...
-
§ 37.51(b)(2)
(2) Transfer stations on a rail line or between rail lines;...
-
Is there a minimum distance between changes in level?
Such level changes may need to be in close proximity, such as at raised thresholds (otherwise a minimum 48” separation will provide enough wheelchair space so that only one vertical change...
-
Can maneuvering for a forward approach be provided when there is space at least 60” deep in front of a door?
Space at least 60” deep in front of a door that is unobstructed on approach sides will provide sufficient depth for a forward approach if appropriate strike-side clearance is provided; but...
-
Orientation (slide 12)
But as you go down the line, the waiting areas are separate. We don’t always do that in public spaces, and we don’t always do that even in office buildings....
-
Footrests and Armrests: ADA Standard Section 1009.2.6
If provided, the armrest positioned opposite the water shall be removable or shall fold clear of the seat when the seat is in the raised (load) position....
-
11B-203.11 Water slides
An accessible route complying with Division 4 shall be provided to the ground- or floor-level entry points, where provided, of stairs, ladders, or other means of reaching the raised elements...
-
11B-203.11 Water slides
An accessible route complying with Division 4 shall be provided to the ground- or floor-level entry points, where provided, of stairs, ladders, or other means of reaching the raised elements...
-
11B-705.1.2.2 Curb ramps
Detectable warnings shall be located so the edge nearest the curb is 6 inches (152 mm) minimum and 8 inches (203 mm) maximum from the line at the face of the curb marking the transition...
-
11B-705.1.2.2 Curb ramps
Detectable warnings shall be located so the edge nearest the curb is 6 inches (152 mm) minimum and 8 inches (203 mm) maximum from the line at the face of the curb marking the transition...
-
11B-503.3.3 Marking
The area within the borderlines shall be marked with hatched lines a maximum of 36 inches (914 mm) on center in a color contrasting with that of the aisle surface....
-
11B-503.3.3 Marking
The area within the borderlines shall be marked with hatched lines a maximum of 36 inches (914 mm) on center in a color contrasting with that of the aisle surface....