Where employee work areas have audible alarm coverage, the wiring system shall be designed so that visible alarms complying with 702 can be integrated into the alarm system....
Search Results "Regarded as Having an Impairment"
-
F215.3 Employee Work Areas
-
708.1 General
Devices that do not require handsets are easier to use by people who have a limited reach....
-
Surface
To prevent injuries, the wall surface must have rounded edges and not be sharp....
-
206.4.4.3 Key Stations and Intercity Rail Stations
Key stations and existing intercity rail stations required by Subpart C of 49 CFR part 37 to be altered shall have at least one entrance complying with 404....
-
609.2.1 Circular Cross Section
Grab bars with circular cross sections shall have an outside diameter of 1 1/4 inches (32 mm) minimum and 2 inches (51 mm) maximum....
-
708.1 General
Devices that do not require handsets are easier to use by people who have a limited reach....
-
215.3 Employee Work Areas
Where employee work areas have audible alarm coverage, the wiring system shall be designed so that visible alarms complying with 702 can be integrated into the alarm system....
-
11B-411.1.2 Car designations
Clarifies requirements that each elevator capable of responding to a hall call console shall have a unique alphabetic designation....
-
704.6 Structural stability
The wall shall extend to the height required by Section 704.11 and shall have sufficient structural stability such that it will remain in place for the duration of time indicated by the...
-
9. TTY
Does the facility have a reasonable number of TTYs available for use by persons who are deaf or hard of hearing?...
-
e-iii
Can the elevator be called and operated automatically without using a special key or having to turn on the elevator from a remote location? [ADA Standards § 4.10.2] Yes No...
-
609.5 Surface Hazards
Grab bars and any wall or other surfaces adjacent to grab bars shall be free of sharp or abrasive elements and shall have rounded edges....
-
804.6.5.1 Side-Hinged Door Ovens
Side-hinged door ovens shall have the work surface required by 804.3 positioned adjacent to the latch side of the oven door....
-
Structural Frame
The structural frame shall be considered to be the columns and the girders, beams, trusses and spandrels having direct connections to the columns and all other members which are essential...
-
§100.7(a)(1)(ii)
(ii) Failing to take prompt action to correct and end a discriminatory housing practice by that person's employee or agent, where the person knew or should have known of the discriminatory...
-
609.2.1 Circular Cross Section
Grab bars with circular cross sections shall have an outside diameter of 1 1/4 inches (32 mm) minimum and 2 inches (51 mm) maximum....
-
Websites for exhibition information
Websites for exhibition information Participants described using museum websites in advance of a visit to read about the exhibits, anticipating the museum will have limited access for...
-
4.34.5.6 BATHTUB AND SHOWER ENCLOSURES
Enclosures on bathtubs shall not have tracks mounted on their rims....
-
§1193.3 Definitions.
Terms used in this part shall have the specified meaning unless otherwise stated....
-
§ 38.31(a)
(a) Any stepwell or doorway immediately adjacent to the driver shall have, when the door is open, at least 2 foot-candles of illumination measured on the step tread or lift platform....
-
1134A.8 Lavatories, vanities, mirrors and towel fixtures
Bathrooms or powder rooms required to be accessible shall have at least one accessible lavatory....
-
11B-703.6.3 Text descriptors
Pictograms shall have text descriptors located directly below the pictogram field. Text descriptors shall comply with Sections 11B-703.2, 11B-703.3 and 11B-703.4....
-
II. Reservations, Understandings, and Declarations
Some have raised alarms over the existence of the Disabilities Committee created by the treaty....
-
Rakks® Brackets Installation Video
Rakks Style brackets have excellent lateral support and work well as bookends....
