Where a sloped entry is provided for wave action pools, leisure rivers, sand bottom pools, and other pools where user access is limited to one area, the handrails shall not be required to...
Search Results "Raised Area"
Commonly Searched Documents
-
Handrails: ADA Standard Section 1009.3.3
-
11B-802.4.2 Identification
If there is no ticket office, the functional equivalent would be in the lobby or at the entrance to the assembly area in a conspicuous location. ◼...
-
11B-405.9 Edge protection
Edge protection shall not be required on the sides of ramp landings having a vertical drop-off of ½ inch (12.7 mm) maximum within 10 inches (254 mm) horizontally of the minimum landing area...
-
11B-209.2.2 Bus loading zones
In bus loading zones restricted to use by designated or specified public transportation vehicles, each bus bay, bus stop, or other area designated for lift or ramp deployment shall comply...
-
11B-1009.3.3 Handrails
Where a sloped entry is provided for wave action pools, leisure rivers, sand bottom pools, and other pools where user access is limited to one area, the handrails shall not be required to...
- Roadtech Manufacturing Retractable Cone Bar Barricades and Barriers
- Diversified Woodcrafts Forward Vision Workstation 2956K-L-ADA
- Macro Supa-Trac Heavy Duty Ground Surface
- HEWI System Circum Handrails
-
§382.91(c)
(c) As a carrier at a U.S. airport, you must, on request, in cooperation with the airport operator, provide for escorting a passenger with a service animal to an animal relief area provided...
-
1011.4, Item 4
Each exit access door from an interior room or area to a corridor or hallway that is required to comply with Section 1011.1, shall be identified by a tactile exit sign with the words “EXIT...
-
Joint Use
Joint use does not include mechanical or custodial rooms or areas occupied by other tenants....
-
12101(a)(3)
(3) discrimination against individuals with disabilities persists in such critical areas as employment, housing, public accommodations, education, transportation, communication, recreation...
-
1002.5.2 Transfer Height
The height of amusement ride seats designed for transfer shall be 14 inches (355 mm) minimum and 24 inches (610 mm) maximum measured from the surface of the load and unload area....
-
1002.5.2 Transfer Height
The height of amusement ride seats designed for transfer shall be 14 inches (355 mm) minimum and 24 inches (610 mm) maximum measured from the surface of the load and unload area....
-
Rest Rooms
This includes rest rooms in work areas and rest rooms located in sky boxes and suites....
-
Wheelchair
Wheelchair means a device designed solely for use by an individual with a mobility impairment for the primary purpose of locomotion in typical indoor and outdoor pedestrian areas. ...
-
§ 35.104 Wheelchair
Wheelchair means a device designed solely for use by an individual with a mobility impairment for the primary purpose of locomotion in typical indoor and outdoor pedestrian areas. ...
-
705.2 Platform Edges
Detectable warning surfaces at platform boarding edges shall be 24 inches (610 mm) wide and shall extend the full length of the public use areas of the platform....
-
E1-g
At each location on the way to each shelter activity area where the accessible route passes through a door, does at least one door meet the following requirements? Yes No...
-
810.5.2 Detectable Warnings
Platform boarding edges not protected by platform screens or guards shall have detectable warnings complying with 705 along the full length of the public use area of the platform....
-
B4. Vertical Clearance
Is the vertical height for the vehicle route to the loading zone, the drop off area, and the exit at least 114 inches (9 feet 6 inches) in height?...
-
2. a. iii. Clear (Path-of-Travel) Floor Space
Access also includes how people will move into and around lobby and office reception areas, and determine the unobstructed floor or ground space to accommodate a wheelchair user....
-
10.3.1(11)
(11) Illumination levels in the areas where signage is located shall be uniform and shall minimize glare on signs....