Support rails complying with Section 11B-407.4.10 shall be provided on at least one wall of the car....
Search Results "Golf Car Rental Area"
-
11B-411.4.10 Support rail
-
11B-411.4.8.2.1 Signal type
The signal shall be an automatic verbal annunciator which announces the floor at which the car is about to stop....
-
11B-411.4.10 Support rail
Support rails complying with Section 11B-407.4.10 shall be provided on at least one wall of the car....
-
§ 37.42(d)(1)
(1) If the railroad operator not using level-entry boarding chooses a means of meeting the performance standard other than using car-borne lifts, it must perform a comparison of the costs...
-
§ 37.42(d)(1)
(1) If the railroad operator not using level-entry boarding chooses a means of meeting the performance standard other than using car-borne lifts, it must perform a comparison of the costs...
-
Effect on Removal of Barriers in Existing Facilities: ADA Standard Section 101.2
Section 101.2 of the ADA Standards covers the effects of the removal of barriers in existing facilities.
-
Access to Health Care for People with Disabilities
Ethics Matters: A publication of the Donnelley Family Disability Ethics Program Access to Health Care for People with Disabilities © Rehabilitation Institute of Chicago 2009....
-
1028.5 Access to a public way
The area shall be permanently maintained and identified as a safe dispersal area. The area shall be provided with a safe and unobstructed path of travel from the building....
-
12162(a)(2)(C)(ii)
(ii) have a restroom usable by an individual who uses a wheelchair if no restroom is provided in such car for any passenger....
-
407.4.6.3 Keypads
Car control keypads shall be in a standard telephone keypad arrangement and shall comply with 407.4.7.2....
-
11B-407.4.6.3 Keypads
Car control keypads shall be in a standard telephone keypad arrangement and shall comply with Section 11B-407.4.7.2....
-
Elevators
If elevators are altered, all cars programmed to respond to the same call control must be similarly modified (§206.6.1)....
-
11B-407.4.6.3 Keypads
Car control keypads shall be in a standard telephone keypad arrangement and shall comply with Section 11B-407.4.7.2....
-
11B-407.4.6.3 Keypads
Car control keypads shall be in a standard telephone keypad arrangement and shall comply with Section 11B-407.4.7.2....
-
ADAAG
to ADAAG and the standards since they were first published affect two sections: 4.29 Detectable Warnings (suspension of the requirement as it applies to curb ramps, hazardous vehicular areas...
- Works with Nest
-
11B-409.4.3 Platform to hoistway clearance
The clearance between the car platform and the edge of any landing sill shall be 1½ inch (38 mm) maximum....
-
409.4.3 Platform to Hoistway Clearance
The clearance between the car platform and the edge of any landing sill shall be 1-½ inch (38 mm) maximum....
-
11B-409.4.3 Platform to hoistway clearance
The clearance between the car platform and the edge of any landing sill shall be 1½ inch (38 mm) maximum....
-
§ 37.89(a)(1)
(1) Remanufactures an intercity or commuter rail car so as to extend its useful life for ten years or more;...
-
§ 38.91(c)(2)
(2) Where level boarding is structurally or operationally impracticable, commuter rail cars shall comply §38.95 of this part....
-
§ 38.175(b)
(b) All other high-speed rail cars shall comply with the similar provisions of subpart F of this part....
-
11B-409.4.3 Platform to hoistway clearance
The clearance between the car platform and the edge of any landing sill shall be 1½ inch (38 mm) maximum....