Elevator car controls shall comply with Section 11B-407.4.6. Control panels shall be centered on a side wall....
Search Results "Rail Passenger Car"
Filters
Commonly Searched Documents
-
11B-408.4.6 Car controls
-
407.4.1 Car Dimensions
Inside dimensions of elevator cars and clear width of elevator doors shall comply with Table 407.4.1....
-
Accessible golf cars (Section-by-Section Analysis)
Accessible golf cars....
-
407.4.1 Car Dimensions
[ECTCR UFAS 4.1.6(4)(c)(ii)] Table 407.4.1 Elevator Car Dimensions Minimum Dimensions Door Location Door Clear Width Inside Car, Side to Side...
-
R215 Passenger Loading Zones (Section-by-Section Analysis)
R215 Passenger Loading Zones (Section-by-Section Analysis) Where passenger loading zones are provided, at least one passenger loading zone for each 30 meters (100 feet) of continuous...
-
Transit Facilities: Rail Stations
Transit Facilities: Rail Stations Much of the early research on detectable warnings was conducted at rapid rail stations and the requirement to provide a detectable warning remains in...
-
11B-209.2.1 Passenger drop-off and loading zones
Passenger drop-off and loading zones, except those required to comply with Sections 11B-209.2.2 and 11B-209.2.3, shall provide at least one passenger drop-off and loading zone complying...
-
11B-209.2.1 Passenger drop-off and loading zones
Passenger drop-off and loading zones, except those required to comply with Sections 11B-209.2.2 and 11B-209.2.3, shall provide at least one passenger drop-off and loading zone complying...
-
1005.2 Railings
Where provided, railings, guards, or handrails shall comply with 1005.2....
-
1005.2 Railings
Where provided, railings, guards, or handrails shall comply with 1005.2....
-
Alternative Golf Car Passage
A golf car passage is a continuous passage on which a motorized golf car can operate....
-
11B-407.4.10.1 Location
Clearance between support rails and adjacent surfaces shall be 1½ inches (38 mm) minimum....
-
11B-407.4.10.1 Location
Clearance between support rails and adjacent surfaces shall be 1½ inches (38 mm) minimum....
-
11B-407.4.10.1 Location
Clearance between support rails and adjacent surfaces shall be 1½ inches (38 mm) minimum....
-
11B-503 PASSENGER DROP-OFF AND LOADING ZONES
11B-503 Passenger drop-off and loading zones [2010 ADAS] 503 Passenger Loading Zones...
-
Access Aisle: ADA Standard Section 503.3
Section 503.3 covers the current ADA Standards for access aisle at passenger loading zones.
-
Security Screening for Passenger with a Disability Same as for Other Passengers
Security Screening for Passenger with a Disability Same as for Other Passengers You must undertake a security screening of a passenger with a disability in the same manner as any other...
-
§ 38.107(a)
(a) If a restroom is provided for the general public, it shall be designed so as to allow a person using a wheelchair or mobility aid to enter and use such restroom as specified in...
-
§ 38.93(d)(4) Exception
Retrofitted vehicles shall be coordinated with the platform in new and key stations such that the horizontal gap shall be no greater than 4 inches and the height of the vehicle floor, under 50% passenger...
-
Elevator Car Controls
Comments recommended that the height of elevator car controls be harmonized with the ANSI A117.1 standard....
-
11B-407.4.10.3 Structural strength
Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the support rail, fastener, mounting device...
-
11B-407.4.10.3 Structural strength
Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the support rail, fastener, mounting device...
-
1006.3 Golf car Passages
1006.3 Golf Car Passages. Golf car passages shall comply with 1006.3....
-
11B-411.4.1 Car dimensions
Inside dimensions of elevator cars and clear width of elevator doors shall comply with Section 11B-407.4.1....