Floor surfaces in elevator cars shall comply with 302 and 303....
Search Results "Loose Fill Surface"
Commonly Searched Documents
-
409.4.2 Floor Surfaces
-
Rollability and Smoothness of Walking Surfaces
surfaces....
-
M301.2 Transfer Surface (Section-by-Section Analysis)
This is an introductory section.
-
3. Review the Research Findings About Accessibility Issues for Play Surfaces
Within 12 months of installation, playground sites in the sample with the loose fill EWF were found to have the greatest number of deficiencies, such as excessive running slope, cross slope...
-
11B-306.2.3 Minimum required depth
The toe clearance shall extend 19 inches (483 mm) minimum under built-in dining and work surfaces required to be accessible by Section 11B-226.1....
- Stabilizer Solutions StaLok Material Waterless Natural Pavement
-
11B-403.3 Slope
The running slope of walking surfaces shall not be steeper than 1:20. The cross slope of walking surfaces shall not be steeper than 1:48....
-
11B-405.4 Floor or ground surfaces
Floor or ground surfaces of ramp runs shall comply with Section 11B-302. Changes in level other than the running slope and cross slope are not permitted on ramp runs....
-
11B-405.4 Floor or ground surfaces
Floor or ground surfaces of ramp runs shall comply with Section 11B-302. Changes in level other than the running slope and cross slope are not permitted on ramp runs....
-
11B-405.4 Floor or ground surfaces
Floor or ground surfaces of ramp runs shall comply with Section 11B-302. Changes in level other than the running slope and cross slope are not permitted on ramp runs....
-
5. Compare Surface Options
Decision-makers should dialogue with the surface supplier regarding realistic, objective measurements to evaluate surface performance and maintain the surface material over the life span...
-
11B-503.4 Floor and ground surfaces
Vehicle pull-up spaces and access aisles serving them shall comply with Section 11B-302. Access aisles shall be at the same level as the vehicle pull-up space they serve. Changes in...
- Access Board: Door and Gate Surfaces
- Better Recreation Surfaces
-
1012.4 Surface
The surface of parking spaces and pull-up spaces shall be firm and stable....
-
1012.4 Surface
The surface of parking spaces and pull-up spaces shall be firm and stable....
-
About this Study
It included laboratory testing of energy absorption and surface firmness on trial surfaces in plywood boxes 0.5 m x 0.5 m (18” x 18”) at a uniform depth of 0.3 m (12”)....
-
Rotational Penetrometer Measurements of Firmness and Stability
exterior surfaces, indicating decreased firmness and stability (Figure 4, Figure 5)....
-
Surfacing the Accessible Playground: 7 Things Every Playground Owner Should Know About the Accessibility of Their Playground Surfaces
Surfacing the Accessible Playground: 7 Things Every Playground Owner Should Know About the Accessibility of Their Playground Surfaces October 2014 A publication of the U.S....
-
4.5.1* General
Ground and floor surfaces along accessible routes and in accessible rooms and spaces including floors, walks, ramps, stairs, and curb ramps, shall be stable, firm, slip-resistant, and shall...
-
4.5.1* GENERAL
Ground and floor surfaces along accessible routes and in accessible rooms and spaces, including floors, walks, ramps, stairs, and curb ramps, shall be stable, firm, slip-resistant, and shall...
-
Stabilized Engineered Wood Fiber for Accessible Playground Surfaces
Winandy Abstract Playground surfaces of sand, pea gravel, and engineered wood fiber (EWF) provide some level of impact protection for children....
-
Do the surface requirements, including those for maximum slope (1:48), apply to all portions of a parking lot?
No, the surface criteria apply only to accessible parking spaces, access aisles, and accessible routes, including those serving other elements or spaces besides parking spaces....