Where food or drink is served for consumption at a counter exceeding 34 inches (864 mm) in height, a portion of the main counter 60 inches (1525 mm) minimum in length shall be...
Search Results "Fire-Building Surface"
-
11B-226.3 Dining surfaces exceeding 34 inches in height
-
907.2.4 Group F
A manual fire alarm system shall be installed in Group F occupancies that are two or more stories in height and have an occupant load of 500 or more above or below the lowest level of exit...
-
11B-904.3.3 Check writing surfaces
Where provided, check writing surfaces shall comply with Section 11B-902.3....
-
11B-904.3.3 Check writing surfaces
Where provided, check writing surfaces shall comply with Section 11B-902.3....
-
804.3.3 Exposed Surfaces
804.3.3 Exposed Surfaces. There shall be no sharp or abrasive surfaces under the work surface counters....
-
Pilot Rock FSDW-30 Campfire Ring
This unit does not require aggregate fill because it is equipped with a fire/log grate inside the fire ring. ...
-
Envirobond Helps Avoid Surface Staining
Envirobond's organic binder swells immediately when in contact with water. This means the erosion control properties of our products are active much faster than any other chemical...
-
907.2.2 Group B
A manual fire alarm system shall be installed in Group B occupancies having an occupant load of 500 or more persons or more than 100 persons above or below the lowest level of exit discharge...
-
5.2.1 General
All toilet buildings with one riser at recreation sites with a FS Recreation Site Development Scale of 3 or higher shall comply with sections 603, 604.4, 604.5, 604.6, and 604.7 of the ABAAS...
-
302 Floor or Ground Surfaces
302 Floor or Ground Surfaces...
-
Accessible Work Surfaces
Concern was expressed that the reference to "work surfaces" may be confused as covering surfaces that are part of a work area or station. Response....
-
403.2 Floor or Ground Surface
Floor or ground surfaces shall comply with 302....
-
403.2 Floor or Ground Surface
Floor or ground surfaces shall comply with 302....
-
§ 36.304(d)(2)(iii)(K)
(K) Shooting facilities with firing positions, sections 243 and 1010....
-
804.3.3 Exposed Surfaces
There shall be no sharp or abrasive surfaces under the work surface counters....
-
804.3.3 Exposed Surfaces
There shall be no sharp or abrasive surfaces under the work surface counters....
-
11B-203.1 General
Sites, buildings, facilities, and elements are exempt from these requirements to the extent specified by 11B-203....
-
11B-203.1 General
Sites, buildings, facilities, and elements are exempt from these requirements to the extent specified by 11B-203....
-
Slope: ADA Standard Section 1002.4.2
The floor or ground surface of wheelchair spaces shall have a slope not steeper than 1:48 when in the load and unload position....
-
11B-1002.4.2 Slope
The floor or ground surface of wheelchair spaces shall have a slope not steeper than 1:48 when in the load and unload position....
-
11B-1002.4.2 Slope
The floor or ground surface of wheelchair spaces shall have a slope not steeper than 1:48 when in the load and unload position....
-
Excerpts from 2003 INTERNATIONAL BUILDING CODE®
COPYRIGHT© 2003 by INTERNATIONAL CODE COUNCIL, INC.
-
Excerpts from 2001 INTERNATIONAL BUILDING CODE®
[See subsections ...]
-
4.2.5 Raised Edge
Where fire rings, grills, or fireplaces are constructed with raised edges or walls, the depth of the raised edge or wall shall be 10 inches (255 mm) maximum....
