[See subsections ...]
Search Results "Electrical Power"
Commonly Searched Documents
-
§ 35.137 Mobility devices.
-
§ 35.137(b)
(b)
-
11B-404.3.3 Thresholds
Thresholds and changes in level at doorways shall comply with Section 11B-404.2.5.
-
11B-404.3.3 Thresholds
Thresholds and changes in level at doorways shall comply with Section 11B-404.2.5.
-
1007.5 Platform lifts
Standby power shall be provided for platform lifts permitted to serve as part of a means of egress....
-
Power-Assisted Doors and Gates [§404.3]
Power-Assisted Doors and Gates [§404.3] Power-assisted devices reduce the opening force of doors with closing mechanisms....
-
205 and 309 Operable Parts
The 1991 Standards, at section 4.27.3, contain an exception, “ * * * where the use of special equipment dictates otherwise or where electrical and communications systems receptacles are...
-
§ 36.311(c)(1) Inquiry about disability
A public accommodation shall not ask an individual using a wheelchair or other power-driven mobility device questions about the nature and extent of the individual´s disability....
-
If a property owner hits the 20% cost cap on path of travel improvements when installing charging stations, are there any other accessibility site retrofits that would still be required?
RESPONSE: EVCS required to be accessible by CBC Chapter 11B must have both, an accessible route to the facility entrance (see CBC Section 11B-812.5.1) and an accessible route from...
- Maddak Wall Switch Extension Handle
-
TECHNICAL QUESTIONS:
[See subsections ...]
-
11B-812.8.7 Location
Required identification signs shall be visible from the EVCS it serves. Signs shall be permanently posted either immediately adjacent to the vehicle space or within the projected...
-
11B-812.5.2 Accessible route to EV charger
An accessible route complying with Section 11B-402 shall connect the vehicle space and the EV charger which serves it.
-
11B-812.8.4 Ambulatory
Ambulatory EVCS shall not be required to be identified by an ISA.
-
11B-812.8.6 Finish and size
Identification signs shall be reflectorized with a minimum area of 70 square inches (45,161 mm2).
-
11B-812.5.2 Accessible route to EV charger
An accessible route complying with Section 11B-402 shall be provided between the vehicle space and the EV charger which serves it.
-
11B-812.8.7 Location
Required identification signs shall be visible from the EVCS it serves. Signs shall be permanently posted either immediately adjacent to the vehicle space or within the projected...
-
11B-812.8.4 Ambulatory
Ambulatory EVCS shall not be required to be identified by an ISA.
-
11B-812.8.6 Finish and size
Identification signs shall be reflectorized with a minimum area of 70 square inches (45161 mm2).
-
Is a transportation operator required to carry these “overweight” wheelchairs?
Some wheelchairs weigh more than 600 pounds when occupied, and the design load of the lifts on our vehicles is 800 pounds. Is a transportation operator required to carry these...
-
Some wheelchairs weigh more than 600 pounds when occupied, and the design load of the lifts on our vehicles is 800 pounds. Is a transportation operator required to carry these “overweight” wheelchairs?
Yes. Transportation operators must carry a wheelchair and occupant if the lift and vehicle can physically accommodate them. If a lift has the minimum design load of 600 pounds, there...
-
Requirements for Platform Lifts
Platform Lift Clear Floor Space and Doors/ Gates
-
1003.2.13.3 Elevators
Standby power shall be provided in accordance with Sections 2702 and 3003....
-
Sec.36.403(c)(2)
(2) For the purposes of this section, alterations to windows, hardware, controls, electrical outlets, and signage shall not be deemed to be alterations that affect the usability of or access...