The clear width of ramps and bridgeplates shall be 30 inches (760 mm) minimum....
Search Results "Character Width (VMS)"
-
T402.6 Clear Width
-
703.2.8 Line Spacing
Spacing between the baselines of separate lines of raised characters within a message shall be 135 percent minimum and 170 percent maximum of the raised character height....
-
703.2.8 Line Spacing
Spacing between the baselines of separate lines of raised characters within a message shall be 135 percent minimum and 170 percent maximum of the raised character height....
-
11B-703.2.8 Line spacing
Spacing between the baselines of separate lines of raised characters within a message shall be 135 percent minimum and 170 percent maximum of the raised character height....
-
7.4.2 Clear Tread Width
The clear tread width of the trail shall be at least 36 inches (915 mm)....
-
Error/Omission: Food service queuing areas are too narrow and do not provide adequate clear width for turns.
Error/Omission: Food service queuing areas are too narrow and do not provide adequate clear width for turns....
-
1130A.2 Width
1130A.2 Width. The accessible route into and throughout covered multifamily dwelling units shall be at least 36 inches (914 mm) wide....
-
11B-216.4.4 Delayed egress locks
Signs required by Chapter 10, Section 1008.1.9.7, item 5.1 at doors with delayed egress locks shall comply with Sections 11B-703.1 _|Signs; General|_ 11B-703.2 _|Signs; Raised Characters...
-
11B-216.4.4 Delayed egress locks
Signs required by Chapter 10, Section 1010.1.9.7, Item 6.4 at doors with delayed egress locks shall comply with Sections 11B-703.1 _|Signs; General|_ 11B-703.2 _|Signs; Raised Characters...
-
Caution regarding minimum Aisle Widths for aisles that serve "elements on both sides"
As a heads up, care should be taken in applying the technical aspects of 11B-403.5.1, Exception 4 re: minimum aisle width in California....
-
703.2.1 Depth
Raised characters shall be 1/32 inch (0.8 mm) minimum above their background....
-
11B-703.2.1 Depth
Raised characters shall be 1/32 inch (0.8 mm) minimum above their background....
-
703.2.1 Depth
Raised characters shall be 1/32 inch (0.8 mm) minimum above their background....
-
11B-703.2.1 Depth
Raised characters shall be 1/32Â inch (0.8 mm) minimum above their background....
-
1018.3 Aisles in Groups B and M
In Group B and M occupancies, the minimum clear aisle width shall be determined by Section 1005.1 for the occupant load served, but shall be not less than that required for corridors by...
-
703.2.1 Depth
Raised characters shall be 1/32 inch (0.8 mm) minimum above their background....
-
11B-703.2.1 Depth
Raised characters shall be 1/32 inch (0.8 mm) minimum above their background....
-
11B-407.2.3.2 Reserved
ETA Editor's Note Imposing additional requirements regarding characters and colors, the preceding CBC requirements pertaining to elevator hoistway signs are more stringent than...
-
11B-407.2.3.2 Reserved
ETA Editor's Note Imposing additional requirements regarding characters and colors, the preceding CBC requirements pertaining to elevator hoistway signs are more stringent than...
-
1018.5 Aisles in other than assembly spaces and Groups B and M
than rooms or spaces used for assembly purposes and Group B and M occupancies, the minimum clear aisle capacity shall be determined by Section 1005.1 for the occupant load served, but the width...
-
1009.2.5 Seat Width
The seat shall be 16 inches (405 mm) wide minimum.
-
1009.2.5 Seat Width
The seat shall be 16 inches (405 mm) wide minimum.
-
Access Board: Informational and Directional Sign Requirements
This video is part of a longer animation produced by the U.S. Access Board. View the animation video in its entirety on the Access Board's website...
-
4.3.5.1 90-Degree Turn
The width of circulation spaces should be wider to accommodate two-way traffic and egress requirements....
