surfaces....
Search Results "Abrasive Surface"
Commonly Searched Documents
- 
    
  
  Rollability and Smoothness of Walking Surfaces
  
 - 
    
  
  M301.2 Transfer Surface (Section-by-Section Analysis)
  
This is an introductory section.
 - 
    
  
  11B-306.2.3 Minimum required depth
  
The toe clearance shall extend 19 inches (483 mm) minimum under built-in dining and work surfaces required to be accessible by Section 11B-226.1....
 - 
    
  
  11B-403.3 Slope
  
The running slope of walking surfaces shall not be steeper than 1:20. The cross slope of walking surfaces shall not be steeper than 1:48....
 - 
    
  
  A4.5.1 General
  
Wheelchairs can be propelled most easily on surfaces that are hard, stable, and regular....
 - 
    
  
  11B-405.4 Floor or ground surfaces
  
Floor or ground surfaces of ramp runs shall comply with Section 11B-302. Changes in level other than the running slope and cross slope are not permitted on ramp runs....
 - 
    
  
  11B-405.4 Floor or ground surfaces
  
Floor or ground surfaces of ramp runs shall comply with Section 11B-302. Changes in level other than the running slope and cross slope are not permitted on ramp runs....
 - 
    
  
  11B-405.4 Floor or ground surfaces
  
Floor or ground surfaces of ramp runs shall comply with Section 11B-302. Changes in level other than the running slope and cross slope are not permitted on ramp runs....
 - 
    
  
  5. Compare Surface Options
  
Decision-makers should dialogue with the surface supplier regarding realistic, objective measurements to evaluate surface performance and maintain the surface material over the life span...
 - 
    
  
  11B-503.4 Floor and ground surfaces
  
Vehicle pull-up spaces and access aisles serving them shall comply with Section 11B-302. Access aisles shall be at the same level as the vehicle pull-up space they serve. Changes in...
 - Access Board: Door and Gate Surfaces
 - 
    
  
  Test Courses & Surfaces
  
Test Courses & Surfaces Test courses were designed and built using nine different types of exterior surfaces (Table 1)....
 - Better Recreation Surfaces
 - 
    
  
  1012.4 Surface
  
The surface of parking spaces and pull-up spaces shall be firm and stable....
 - 
    
  
  1012.4 Surface
  
The surface of parking spaces and pull-up spaces shall be firm and stable....
 - 
    
  
  About this Study
  
It included laboratory testing of energy absorption and surface firmness on trial surfaces in plywood boxes 0.5 m x 0.5 m (18” x 18”) at a uniform depth of 0.3 m (12”)....
 - 
    
  
  Rotational Penetrometer Measurements of Firmness and Stability
  
exterior surfaces, indicating decreased firmness and stability (Figure 4, Figure 5)....
 - 
    
  
  Qualitative and Observational Analysis by Surface Type
  
Qualitative and Observational Analysis by Surface Type The aggregate material listed below contains a size (inch), the label “minus”, and an aggregate type....
 - 
    
  
  Surfacing the Accessible Playground: 7 Things Every Playground Owner Should Know About the Accessibility of Their Playground Surfaces
  
Surfacing the Accessible Playground: 7 Things Every Playground Owner Should Know About the Accessibility of Their Playground Surfaces October 2014 A publication of the U.S....
 - TechniSoil G3® Pathway Liquid Polymer Stabilizer
 - 
    
  
  4.5.1* General
  
Ground and floor surfaces along accessible routes and in accessible rooms and spaces including floors, walks, ramps, stairs, and curb ramps, shall be stable, firm, slip-resistant, and shall...
 - 
    
  
  4.5.1* GENERAL
  
Ground and floor surfaces along accessible routes and in accessible rooms and spaces, including floors, walks, ramps, stairs, and curb ramps, shall be stable, firm, slip-resistant, and shall...
 - Unity Surfacing Systems Pave-Land 1 1/2" and 1 3/4" thick Interlocking Tiles