boarding and alighting areas shall provide a detectable transition between the boarding/alighting area and the roadway; the detectable transition shall consist of a curb with the face sloped...
Search Results "Surface Slope"
-
11B-810.2.3 Connection
-
11B-810.2.3 Connection
boarding and alighting areas shall provide a detectable transition between the boarding/alighting area and the roadway; the detectable transition shall consist of a curb with the face sloped...
-
303.3 Beveled
Changes in level between 1/4 inch (6.4 mm) high minimum and 1/2 inch (13 mm) high maximum shall be beveled with a slope not steeper than 1:2. Advisory 303.3 Beveled....
-
Pedestrian Circulation Path
A prepared exterior or interior surface provided for pedestrian travel in the public right-of-way....
-
Walk
An exterior pathway with a prepared surface intended for pedestrian use, including general pedestrian areas such as plazas and courts....
-
WALK
An exterior pathway with a prepared surface intended for pedestrian use, including general pedestrian areas such as plazas and courts....
-
4.29.7* STANDARDIZATION
Textured surfaces for tactile door warnings shall be standard within a building, facility, site, or complex of buildings....
-
11B-705.1.1.3.1
11B-705.1.1.3.1 Detectable warning surfaces shall be yellow and approximate FS 33538 of Federal Standard 595C....
-
Accessible Counter Height
Comments from persons with disabilities considered this too high to be used as a writing surface....
-
Expert Advice of Medical Practitioners
Expert Advice of Medical Practitioners Numerous practitioners commented on the importance of the availability of a lower transfer surface. Nüket J....
-
Introduction
Wood chip surfaces on trails create difficulties for those who use mobility aids, such as wheelchairs and walkers, due to their softness, shifting, and uneven surface....
-
II. Research Methodology
Research Methodology Beginning in 2010 NCA and the Access Board began strategizing on how to provide a useful resource to trail managers on what natural surface materials were being used...
-
Limitations
One limitation associated with this study is the use of wood to construct the engineered surfaces....
-
References
References Axelson PW, Chesney D (April 1999): “Accessible Exterior Surfaces Technical Report,” USATBCB, Washington, DC....
-
3.3.2 Experienced Clinicians
Access Board staff asked these clinicians to comment on topics primarily related to transferring patients and the implications for recommendations relating to transfer surfaces....
-
Readily Achievable Barrier Removal
For example, where there is not enough space to install a ramp with a slope that complies with the Standards, a business may install a ramp with a slightly steeper slope....
-
8.2.1 Participants
Moderately-severe, gently sloping hearing loss: PTA is greater than 41 dB HL with threshold at 2000 Hz between 55 and 60 dB HL). 4....
-
11B-233.3.1.2.6.1 Single building with one common (lobby) entrance
Test No. 1 -- Individual Building Test may only be used if the site has terrain over 15 percent slope. Test No. 3 -- Unusual Characteristics Test may be used if applicable....
-
1.2 Background
Detectable warning surfaces are intended primarily to provide a tactile cue to pedestrians who are blind or have visual impairments....
-
11B-1005.3.1 Curb or barrier
Curbs or barriers shall extend 2 inches (51 mm) minimum above the surface of the fishing pier or platform....
-
1005.3.1 Curb or Barrier
Curbs or barriers shall extend 2 inches (51 mm) minimum above the surface of the fishing pier or platform....
-
505 Handrails
505 Handrails The 2010 Standards add a new technical requirement at section 406.3 for handrails along walking surfaces....
-
d-iv
Are the handrails mounted 34 to 38 inches above the ramp surface? [ADA Standards § 4.8.5] Yes No...
-
f-vii
Are the handrails mounted 34 to 38 inches above the ramp surface? [ADA Standards § 4.8.5] Yes No...