A clear floor space complying with 305 shall be provided on each side of the bed. The clear floor space shall be positioned for parallel approach to the side of the bed....
Search Results "Side-Opening Door"
Filters
Commonly Searched Documents
-
805.3 Clear Floor or Ground Space
-
Door King Inc. 1837 PC Programmable IM Server Overview
Requires the Registered User plan or above. Login! -
502.3.4 Location
Access aisles shall be permitted to be placed on either side of the parking space except for angled van parking spaces which shall have access aisles located on the passenger side of the...
-
806.2.3 Sleeping Areas
At least one sleeping area shall provide a clear floor space complying with 305 on both sides of a bed....
-
F232.5.1 Cubicles and Counters
At least 5 percent, but no fewer than one, of cubicles shall comply with 902 on both the visitor and detainee sides....
-
232.5.1 Cubicles and Counters
At least 5 percent, but no fewer than one, of cubicles shall comply with 902 on both the visitor and detainee sides....
-
Width [4.7.3] and Surface [4.7.4]
The minimum clear width of a curb ramp is 36 inches, exclusive of flared sides....
-
Assisted Living Directory - South Carolina Assisted Living Facilities & Senior Care
Interesting questions and comments we have received about Assisted Living in South Carolina Q: My dad has had a stroke and he is paralyzed on his left side....
-
11B-208.3.3.2
A door leading directly from the residential dwelling unit which immediately enters the garage. 2. ...
-
11.2 Q. Under the individual building test, at what point of the planned entrance is the measurement taken?
On a horizontal plane, the center of each individual doorway should be the point of measurement when measuring to an arrival point, whether the doorway is an entrance door to the building...
-
5. Toilet centerline
Toilet centerline: The toilet bowl needs to be centered 18 inches from the side wall, so that inmates with disabilities can use the side grab bar....
-
§ 1194.22(f)
(f) Client-side image maps shall be provided instead of server-side image maps except where the regions cannot be defined with an available geometric shape....
-
11B-604.8.2.3 Grab bars
A side-wall grab bar complying with Section 11B-604.5.1 shall be provided on both sides of the compartment....
-
DEL Curved Sheer Drapery
Video demonstration of product being closed and opened....
-
American Foundation for the Blind
This was our motto when we opened our doors in 1921, and it continues to guide us today....
-
Sharing an Access Aisle
The proposed rule, consistent with the original ADAAG, allowed access aisles to be provided on either side of the parking space....
-
5.9.2.2 Standing Supports on Dual Ramped Entry Raised Platforms with Wheelchair Spaces Recommendations
Rationale for the recommendation Users need to access either side of the ramp for entry....
-
Unisex (Single-Use or Family) Toilet and Unisex Bathing Rooms: ADA Standard Section 213.2.1
Section 213.2.1 covers scoping requirements in the current ADA Standards for unisex (single-use or family) toilet and unisex bathing rooms.
-
232.5.1 Cubicles and Counters
At least 5 percent, but no fewer than one, of cubicles shall comply with 902 on both the visitor and detainee sides....
-
11B-812.7.1 Location
Access aisles at vehicle spaces shall not overlap the vehicular way and may be placed on either side of the vehicle space they serve except for van accessible spaces which shall have access...
-
Problem One (Lifts and Elevators)
Otherwise, leave the key in the elevator or lift for the entire time the polling place is open, or station a volunteer, who has been trained in its operation, to operate the elevator or...
-
Slope : Intercept
I have designed a set of ramps that are about 3 feet square and perform as a modular set of objects: a low profile bit of geometry designed to nest and stack, to attach side-by-side, to...
-
E1-g
At each location on the way to each shelter activity area where the accessible route passes through a door, does at least one door meet the following requirements? Yes No...
-
407.12 Reach Height
At least one of each type of operable part of stationary ICT shall be at a height conforming to 407.12.2 or 407.12.3 according to its position established in 407.12.1 for a side reach or...
