This part prescribes standards for the design, construction, and alteration of publicly owned residential structures to insure that physically handicapped persons will have ready access...
Search Results "ITU-T: International Telecommunications Union Telecommunications Standardization Sector"
Filters
Commonly Searched Documents
-
§40.1 Purpose.
-
Compilation of Instruments and Measurement Methods for Surface Accessibility
Methods for Surface Accessibility During the course of this project the following information was developed as background information to assist industry in developing their guidelines and standards...
-
Must accessible routes or crossings be marked?
The ADA Standards require accessible parking spaces and access aisles to be marked, but they do not require accessible routes, including portions crossing vehicular ways, to be marked....
-
1.1.7.3 Conflicts
When the requirements of this code conflict with the requirements of any other part of the California Building Standards Code, Title 24, the most restrictive requirements shall prevail....
-
§ 37.7(a)
(a) For purposes of this part, a vehicle shall be considered to be readily accessible to and usable by individuals with disabilities if it meets the requirements of this part and the standards...
-
1.1.7.3 Conflicts
When the requirements of this code conflict with the requirements of any other part of the California Building Standards Code, Title 24, the most restrictive requirements shall prevail....
-
Face® Dipstick® Floor Profiler (Measuring F-Numbers - Concrete Flatness & Levelness Measurement)
Answer™ – just as fast as any other profiler when they are used according to their instructions; and the profiler that measures the most flatness/levelness indices, using the most extensive standard...
-
11B-904.4.2 Forward approach
[2010 ADA Standards] 904.4.2 Forward Approach. A portion of the counter surface that is 30 inches (760 mm) long minimum and 36 inches (915 mm) high maximum shall be provided....
-
11B-1009.2.4 Seat
[2010 ADA Standards] 1009.2.4 Seat Height....
-
Stadium-Style Movie Theaters
36.406(f), in addition to other obligations, stadium-style movie theaters must meet horizontal and vertical dispersion requirements set forth in sections 221.2.3.1 and 221.2.3.2 of the 2010 Standards...
-
Designated Aisle Seats
Section 4.1.3(19)(a) of the 1991 Standards requires one percent (1%) of fixed seats in assembly areas to be designated aisle seats with either no armrests or folding or retractable armrests...
-
Issue 14: How can improved lighting and zero net energy goals by achieved while improving health care?
We have some of our standards relative to lighting that we think are appropriate for whatever function that we’re doing; it’s different needs for different functions....
-
T403 Lifts
These commenters urged the Access Board to instead reference existing standards for public vehicular lifts set forth in the FMVSS, which are issued by the National Highway Traffic Safety...
-
Conclusion
Where the playground surface material fails to comply with safety standards for impact attenuation, children are put at risk of injury. ...
-
15(b)
(b) In determining whether any Post-1993 Owned Hotel and Post-1993 Joint Venture Hotel has complied with the ADA Standards, the Parties agree that each Post-1993 Owned Hotel and each Post...
-
BlueDAG App
Identify barriers faster: Use the BlueDAG Barrier Finder and Check List tools to identify barriers based on applicable federal and state standards....
-
4. Do the carpet requirements of Section 302.2 apply to ground level accessible routes within a play area?
Within the play area, the provisions applying to “carpet” in Section 302 are replaced by the performance standard in ASTM F 1951-99....
-
g) New Construction and Alterations
contends that "the City's policies and procedures regarding new construction and alterations . . . do not require a close-out inspection for compliance with federal disability access design standards...
-
Height – M301.2.1 & M302.2.1
Height – M301.2.1 & M302.2.1 The subcommittee discussed the increments for adjustability and decided that infinite adjustability is the appropriate standard as both electronic and...
-
If the manufacturer states that the design load is 800 pounds, can the transportation operator limit actual use to 600 pounds for safety reasons?
The NHTSA safety standards and the DOT ADA regulations were designed to complement each other....
-
Paperwork Reduction Act
Under this rule, railroads that choose to use a means of meeting the performance standard other than level-entry boarding would have to submit a proposed plan to FRA or FTA demonstrating...
-
§ 37.9(b)
not consistent with the requirements set forth in Appendices B and D to 36 CFR part 1191 and Appendix A to this part, if the modifications complied with the Uniform Federal Accessibility Standards...
-
Study Limitations
Although the above sample size analysis suggests that we may have reached a saturation point, for standards research this is still considered a small sample size and may not reflect the...
-
Relationship to Other Laws
Except as otherwise provided in this part, this part shall not be construed to apply a lesser standard than the standards applied under title V of the Rehabilitation Act of 1973 (29 U.S.C...
