Together these companies produce the vast majority of the hardware items used in the nation’s commercial and institutional buildings -- from hinges and locks to door controls and exit devices...
Search Results "End-Opening Door"
-
Builders Hardware Manufacturers Association (BHMA)
-
11B-405.7 Landings
A level landing is needed at the accessible door to permit maneuvering and simultaneously door operation. FIGURE 11B-405.7 ‡‡ RAMP LANDINGS...
-
Adaptability
It is not intended to include moving walls, relocating plumbing, replacing fixtures, widening door frames, or other work more appropriately addressed in design and construction....
-
405.7 Landings
A level landing is needed at the accessible door to permit maneuvering and simultaneously door operation. Figure 405.7 Ramp Landings...
-
11B-810.10 Track crossings
Exception: Openings for wheel flanges shall be permitted to be 2½ inches (64 mm) maximum. FIGURE 11B-810.10 (EXCEPTION) TRACK CROSSINGS...
-
607.7 Bathtub Enclosures
Enclosures on bathtubs shall not have tracks installed on the rim of the open face of the bathtub. [ECTCR UFAS 4.20.7]...
-
§27.71(k)(5)(iii) Captioning.
Multimedia content that contains speech or other audio information necessary for the comprehension of the content must be open or closed captioned....
-
§ 27.71(k)(5)(iii) Captioning
Multimedia content that contains speech or other audio information necessary for the comprehension of the content must be open or closed captioned....
-
Wheelchair accessible seating is required. At least one percent of the seating must be wheelchair seating locations.
Each wheelchair seating location is an open, level space that accommodates one person using a wheelchair and has a smooth, stable, and slip-resistant surface....
-
Gates and Barriers on Trails
If gates or barriers are constructed to control access to trails, include openings wide enough to allow hiker passage....
-
607.7 Bathtub Enclosures
Enclosures on bathtubs shall not have tracks installed on the rim of the open face of the bathtub....
-
810.10 Track Crossings
EXCEPTION: Openings for wheel flanges shall be permitted to be 2½ inches (64 mm) maximum. Figure 810.10 (Exception) Track Crossings...
-
Handrail Extensions
Handrail Extensions ADAAG addresses handrail height, diameter, and extensions provided to the end of the gangway....
-
5.2.1.3 Transfer Surface Size Recommendations for Stretchers (M301)
The patient would not use the short end as the point of entry because it would require the patient to slide a long distance to lie on the stretcher....
-
Curb Ramps and Blended Transitions (R309.4) (Section-by-Section Analysis)
Parking spaces at the end of block face can be served by curb ramps or blended transitions at the pedestrian street crossing....
-
11B-604.5.1 Side wall
wall grab bar shall be 42 inches (1067 mm) long minimum, located 12 inches (305 mm) maximum from the rear wall and extending 54 inches (1372 mm) minimum from the rear wall with the front end...
-
610.3.2 L-Shaped Seats
The end of the "L" shall be 22 inches (560 mm) minimum and 23 inches maximum (585 mm) from the main seat wall....
-
611.3 Operable Parts
Operable parts, including doors, lint screens, and detergent and bleach compartments shall comply with 309....
-
Section 1193.23 Product design, development and evaluation
At this end of the evaluation spectrum, only one hour of professional time is projected to be required, for an estimated cost of $80....
-
4.Information, documentation, and training
Such information and documentation includes user guides, installation guides for end-user installable devices, and product support communications, regarding both the product in general and...
-
206.7 Platform Lifts, F206.7 Platform Lifts
Amendatory Language For the reasons stated in the preamble, we amend 36 CFR part 1191 as follows: In 206.7, adding a new sentence at the end of the section to read as follows: 206.7...
-
3.6.2. Device Replacement
To account for the ongoing costs associated with the replacement of devices prior to the end of their lifespan and the replacement of these devices at the end of their lifespan, the primary...
-
Section 1194.41 Information, Documentation, and Support (Preamble, Section-by-Section Analysis)
Paragraph (a) states that when an agency provides end-user documentation to users of technology, the agency must ensure that the documentation is available upon request in alternate formats...
-
Landscape Forms Inc. Parc Vue Bench Collection
backed or backless 72" length Optional end arms for backed bench, factory welded to end frame. Optional seat dividers discourage sleepers and skateboarders....
