A parcel of land bounded by a property line or a designated portion of a public right-of-way....
Search Results "Specified Public Transportation"
2010 ADA Definition
Specified Public Transportation: Specified public transportation means transportation by bus, rail, or any other conveyance (other than by aircraft) that provides the general public with general or special service (including charter service) on a regular and continuing basis.
-
Site
-
SITE
A parcel of land bounded by a lot line or a designated portion of a public right-of-way....
-
11B-245.1 General
Public accommodations located in private residences shall comply with Section 11B-245....
-
SITE
A parcel of land bounded by a lot line or a designated portion of a public right-of-way....
-
11B-245.1 General
Public accommodations located in private residences shall comply with Section 11B-245....
-
Landscape Forms Inc. MutipliCITY Path Light Illuminated Bollards
Powered lights can be specified with type 4 or type 5 light distribution to provide desired light patterns and luminance, achieved by variations in the number and placement of LED arrays...
-
Door and Signal Timing
Section 407.3.4 specifies door and signal timing....
-
604.2 Location
partition, except that the water closet shall be 17 inches (430 mm) minimum and 19 inches (485 mm) maximum from the side wall or partition in the ambulatory accessible toilet compartment specified...
-
Urinal Depth
In the proposed rule, the Board sought to clarify the requirement in the original ADAAG that accessible urinals have an "elongated" rim by specifying a minimum dimension of 13 ½ inches,...
-
§35.175 Attorney's Fees
The Judiciary Committee Report specifies that such items are included under the rubric of ‘‘attorneys fees’’ and not ‘‘costs’’ so that such expenses will be assessed against a plaintiff...
-
Website Access
Specify accessible tub rooms from roll-in shower rooms....
-
Summary
Otherwise, where the ADA or ABA Standards require accessible spaces or elements to be identified by the ISA, the ISA must be used even where a state or local code or regulation specifies...
-
211.3 More Than Minimum Number
Where more than the minimum number of drinking fountains specified in 211.2 are provided, 50 percent of the total number of drinking fountains provided shall comply with 602.1 through 602.6...
-
Character Proportion [4.30.2]
Recommendation: While ADAAG does not specify the character to use in calculating proportions, SEGD recommends the capital "O" and number "0" for character proportion and the capital "I"...
-
Size and Clearances [4.21.2]
Size and Clearances [4.21.2] Clear floor space is specified for side transfers. Where a forward approach is provided, space at least 60 inches wide provides room for turning....
-
Exposed Pipes and Surfaces [4.19.4]
If an under-lavatory enclosure is used, the specified knee and toe clearances must be maintained....
-
Raised and Braille Characters on Hoistway Entrances [4.10.5]
Braille characters are often located below raised characters, although the location is not specified in ADAAG....
-
General [5.1]/ Access Aisles [5.3]
The required clear width (36 inches minimum) is specified for the clearance between the edges of fixed tables or between table edges and walls....
-
1018.7.1 Maximum Running Slope and Segment Length
Where the running slope of a segment a beach access route is steeper than 1:20 (5%), the maximum length of the segment is specified in Table 1018.7.1, and a resting interval is required...
-
11B-604.9.1 Location
partition, except that the water closet shall be 17 inches (432 mm) minimum and 19 inches (483 mm) maximum from the side wall or partition in the ambulatory accessible toilet compartment specified...
-
Opening Force
Historically, the Board has not specified a maximum opening force for exterior hinged doors to avoid conflicts with model building codes....
-
Mounting Height and Location
The proposed rule specified a range of height of 48 to 60 inches for raised characters and a range of 40 to 60 inches for braille....
-
Toilet Paper Dispensers
Commenters noted that the 12 inch minimum was inconsistent with provisions for grab bars in section 609 which specify a minimum clearance of 15 inches between grab bars and protruding objects...
-
Q2.) What are the types of “field conditions” that were anticipated where the advisory says “tolerances recognized by this provision include those for field conditions”?
Tolerances are essentially the degree of perfection expected by skilled laborers working carefully with the materials specified. ...
