Coat hooks shall not be located above the bench or other seating in the room. [2010 ADAS] 803.5 Coat Hooks and Shelves....
Search Results "Seat Width"
Commonly Searched Documents
-
11B-803.5 Coat hooks and shelves
-
Designed Use
For example, on a trail with Managed Uses of all-terrain vehicle and Motorcycle, all-terrain vehicle use would be the Designed Use because this use requires wider tread widths and has lower...
-
809.2.2 Turning Space
EXCEPTION: Turning space shall not be required in exterior spaces 30 inches (760 mm) maximum in depth or width. Advisory 809.2.2 Turning Space....
-
Sections 505.10.2 and 505.10.3
The requirement in the 1991 Standards that handrails extend horizontally at least 12 inches beyond the width of one tread at the bottom of a stair was changed in the 2004 ADAAG by the Access...
-
Sharing an Access Aisle
Requirements for access aisles in section 502.3 address width, length, marking, and location. Two spaces are permitted to share an access aisle....
-
1127B.5, Item 4
A level landing 4 feet (1219 mm) deep shall be provided at the upper end of each curb ramp over its full width to permit safe egress from the ramp surface, or the slope of the fanned or...
-
809.2.2 Turning Space
EXCEPTION: Turning space shall not be required in exterior spaces 30 inches (760 mm) maximum in depth or width. Advisory 809.2.2 Turning Space....
-
5.3.2 Transfer Sides Recommendations for M301
The transfer surface shall be located to provide options to transfer from a mobility device onto one short side (depth) and one long side (width) of the surface....
-
809.2.2 Turning Space
EXCEPTION: Turning space shall not be required in exterior spaces 30 inches (760 mm) maximum in depth or width. Advisory 809.2.2 Turning Space....
-
Showers
Several commenters requested that the final Guidelines provide dimensions on the appropriate width and height of showers and shower doors....
-
In-swinging Bathroom Doors
Once a minimum door width is provided, a tenant who finds a bathroom not readily usable can have the door rehung as an outswinging door....
-
Construction Specification Institute
For longitudinal lines, measurements were to be taken in minimum 5 - foot lengths running parallel to the long dimension, with one measurement line per 3 feet of width and within 2 feet...
- Inclusion Solutions Voting Booth Accessories Franklin Voting Chair
- Rockwood Manufacturing Company BFRC24 Vertical Rod Cover
- Rockwood Manufacturing Vertical Rod Cover BFRC12
-
F. Measures Taken To Limit Impact on Small Entities
to approximately 2 percent of seats....
-
2. Accessible lavatories
commented on the Foreign Carriers NPRM is in the process of working with carriers and manufacturers to develop an accessible lavatory design for single-aisle aircraft that would minimize seat...
-
7.6. Measures Taken to Limit Impact on Small Entities
to approximately 2 percent of seats. ...
- Stanley SB600 Bifolding Door
- DORMA ED700 Low-Energy Swing Door Operator
- TownSteel ED6700 Narrow Stile Concealed Vertical Panic Device
- Kawneer North America 260/360/560 Insulclad™ Thermal Entrances
- GE® 24" Standard Clean Free-Standing Electric Range JAS02SNSS
- Handi-Ramp Galvanized Steel Ramps