must comply with ADAAG provisions for the location, width (minimum of 36 inches), passing space, head room, surface, slope (maximum of 1:12 or 8.33%), changes in level, doors, egress, and areas...
Search Results "Resting Area"
-
Accessible Routes
-
C. Accessibility Within Toilet Rooms
Is there an area within the toilet room where a person who uses a wheelchair or mobility device can turn around - either a minimum 60-inch diameter circle or a “T”-shaped turn area?...
-
Multi-tasking
computer while talking on phone) Identify tasks that must be performed simultaneously and tasks that can be performed individually Provide specific feedback to help employee target areas...
-
A. Finish and Contrast
Contrast in percent shall be determined by: Contrast=[B−B)/B] × 100 Where B = light reflectance value (LRV) of the lighter area and B = light reflectance value (LRV) of the darker...
-
11B-705.1.1.3.2
Contrast in percent shall be determined by: Contrast percent = [(B1-B2)/B1] x 100 percent where B1 = light reflectance value (LRV) of the lighter area and B2 = light reflectance...
-
11B-705.1.1.3.2
Contrast in percent shall be determined by: Contrast percent = [(B1-B2)/B1] x 100 percent where B1 = light reflectance value (LRV) of the lighter area and B2 = light reflectance...
-
11B-502.3.3 Marking
The area within the blue borderlines shall be marked with hatched lines a maximum of 36 inches (914 mm) on center in a color contrasting with that of the aisle surface, preferably blue or...
-
Purchase of multiple tickets. (Section-by-Section Analysis)
The proposed regulation permits up to three companions to sit in a designated wheelchair area, platform, or cross-over aisle that is designated as a wheelchair area, even if the number of...
-
Purchase of multiple tickets. (Section-by-Section Analysis)
as a wheelchair area, even if the number of companions outnumber the individuals requiring a wheelchair space. ...
-
11B-502.3.3 Marking
The area within the blue borderlines shall be marked with hatched lines a maximum of 36 inches (914 mm) on center in a color contrasting with that of the aisle surface, preferably blue or...
-
11B-502.3.3 Marking
The area within the blue borderlines shall be marked with hatched lines a maximum of 36 inches (914 mm) on center in a color contrasting with that of the aisle surface, preferably blue or...
-
Safe Harbor
When alterations or additions are made to existing buildings or facilities, an accessible path of travel to the specific area of alteration or addition shall be provided....
-
Safe Harbors
When alterations or additions are made to existing buildings or facilities, an accessible path of travel to the specific area of alteration or addition shall be provided....
-
Ticket Prices and Dispersal of Wheelchair Spaces
Paragraph 5 of the "Line of Sight and Dispersion of Wheelchair Spaces in Assembly Areas" section of the Department of Justice's Guidance on the 2010 ADA Standards for Accessible Design document...
-
ADA25: #17 of 25 -- Recreation
One area we’ve focused on is sports. For example, NFL Football. Watching on TV, we know all that is going on because of the closed captioning. But what about in stadiums?...
-
Boundaries of Angled Parking Spaces
triangular sections" at the head of the stall and the foot of the stall could have slopes > 1:48 and possibly have a column in these locations (see sketch) - it would seem that these areas...
-
Regulatory Process Matters
and performing area, accessible route required to directly connect both areas....
-
11B-804.2.2 U-Shaped
In U-shaped kitchens enclosed on three contiguous sides, clearance between all opposing base cabinets, counter tops, appliances, or walls within kitchen work areas shall be 60 inches (1524...
-
§ 36.406(f)(4)(ii)
(ii) It is located within the area of an auditorium in which the vertical viewing angles (as measured to the top of the screen) are from the 40th to the 100th percentile of vertical viewing...
-
11B-203.14 Raised diving boards and diving platforms
accessible route complying with Division 4 shall be provided to the ground- or floor-level entry points, where provided, of stairs, ladders, or other means of reaching the raised elements or areas...
-
1002 Amusement Rides
This section also addresses access at loading and unloading areas and provides criteria for wheelchair spaces, ride seats designed for transfer, and transfer devices....
-
505.3 Continuity
EXCEPTION: In assembly areas, handrails on ramps shall not be required to be continuous in aisles serving seating....
-
Maps/floor plans
at the front desk for use during the Museum visit an up-to-date tactile map of the Museum's current floor plan, including temporary exhibitions, changes to the permanent exhibition and areas...
-
Common Technical Requirements
For instance, if five benches are provided at a viewing area, at least 20 percent (or one) of the benches must comply with the technical requirements for benches....