This is the "level" position. While the level is in this position, measure the distance between the bottom end of the level and the sloped surface below....
Search Results "Elevator Car Position Indicator"
Filters
Commonly Searched Documents
-
Sloped Surfaces
-
Additional Transfer Techniques: Use of Stretchers and Gurneys
Other equipment may be located in spaces with no room at the end of the table making it impossible to position a portable floor lift....
-
Audio Induction Loop
Consistent and uniform coverage is sometimes difficult with wire loops (although not with 3-D mats), depending on the application and the relative position of the listener....
-
§ 38.23(b)(4) Power or equipment failure
Platforms stowed in a vertical position, and deployed platforms when occupied, shall have provisions to prevent their deploying, falling, or folding any faster than 12 inches/second or their...
-
Accessible Routes: ADA Standard Section 1002.2
Steeper slopes are permitted on accessible routes connecting the amusement ride in the load and unload position where it is “structurally or operationally infeasible.”...
-
11B-1002.4.3 Gaps
Floors of amusement rides with wheelchair spaces and floors of load and unload areas shall be coordinated so that, when amusement rides are at rest in the load and unload position, the vertical...
-
Clarity Wake Assure Extra Loud Alarm Clock with Large Numbers
The Wake Assure™ Alarm Clock, by Clarity®, provides a super loud alarm of up to 85+ decibels as well as a visual alarm indicator....
-
403.6 Handrails
Handrails provided in elevator cabs and platform lifts are not required to comply with the requirements for handrails on walking surfaces....
-
IS ASSISTANCE REQUIRED?
However, some may need assistance with voice communication devices in an elevator....
-
403.6 Handrails
Handrails provided in elevator cabs and platform lifts are not required to comply with the requirements for handrails on walking surfaces....
-
1(2)(b)(ii)
(ii) if there are no vehicular or pedestrian arrival points within 50 feet of the planned entrance, the unusual characteristics result in a difference in finished grade elevation exceeding...
-
4.3.5 Transfer Height
Tent platform surfaces that are not the same elevation as the ORAR shall be between 17 inches (430 mm) minimum and 19 inches (485 mm) maximum above the floor or ground surface adjacent to...
-
4.3.5 Transfer Height
Tent platform surfaces that are not the same elevation as the ORAR shall be between 17 inches (430 mm) minimum and 19 inches (485 mm) maximum above the floor or ground surface adjacent to...
-
Raised Work Areas (§203.9)
Raised Work Areas (§203.9) Employee work areas under 300 s.f. that are elevated at least 7” as an essential functional condition of the space (excluding raised courtroom stations...
-
§ 37.3 Rapid rail
Rapid rail also may operate on elevated or at grade level track separated from other traffic....
-
U.S. Department of Transportation: Self-Evaluation Basics
This Web site allows you to indicate areas of interest and receive alerts when material that matches your interests becomes available....
-
11B-502.5 Vertical clearance
Exception: In existing multistory parking facilities, car parking spaces, access aisles and vehicular routes serving them shall provide a vertical clearance of 80 inches (2032 mm) minimum...
-
Guldmann Basic High Sling - Kids
Suitable for lifting persons with little control over their head and body lifting to and from a lying position (bed, changing bench and floor etc.)...
-
Guldmann Basic High Bariatric Sling, 1100 lbs / 500 kg
Suitable for lifting persons with little control over their head and body lifting to and from a lying position (bed and floor etc.)...
-
11B-804.6.2 Operable parts
Bottom-hinged appliance doors, when in the open position, shall not be required to comply with Section 11B-309.3....
-
11B-902.4.1 Clear floor or ground space
A clear floor space complying with Section 11B-305 positioned for forward approach shall be provided....
-
711.3.1.2 Through-penetration firestop system
Through penetrations shall be protected by an approved penetration firestop system installed as tested in accordance with ASTM E 814, with a minimum positive pressure differential of 0.01...
