Aesthetics Over the past 100 years, Corbin Russwin has been well-known for weaving pleasing aesthetics and inventive designs into architectural door hardware, and today’s wide stile exit...
Search Results "Door Clear Width"
-
Corbin Russwin Inc. ED5000 Series Exit Device
-
Behavioral Safety Products #DH410 Cylindrical Ligature Resistant Lever Handle
The escutcheon plate is sloped at a low profile, from the door to the lever handle itself, to eliminate any further ligature points, and maintains extremely tight tolerances. ...
-
Outdoor Rinsing Showers [1011.2, 1011.3, and 1011.7]
At outdoor rinsing showers, a minimum of 60 by 60 inches of clear ground space must be provided....
-
Figure 404.2.4.1(g) Maneuvering Clearances at Manual Swinging Doors and Gates: Hinge Approach, Push Side with Closer and Latch – Drawing from the U.S. Access Board
-
Allegion Von Duprin 33A/35A Series Exit Devices
33A and 35A for all types of single and double doors with mullion, UL listed for Panic Exit Hardware. Devices are ANSI A156.3 – 2001 Grade 1....
-
Technical Memorandum TM 2013-14 Dining Surfaces
Length Clear floor space complying with TAS 305 for a forward approach is required for an accessible dining surface based on TAS 902.2....
-
Allegion Von Duprin 55 Series Cross Bar Exit Devices
5575 mortise lock devices for all types of single and double doors. UL listed for accident hazard installations....
-
2.4 Patient Areas
Is there space in the waiting room for wheelchair users to sit? Is there space in the exam room for an individual using a wheelchair or other mobility aid to move and...
-
Seating [4.32.2] and Knee Clearance [4.32.3]
Seating [4.32.2] and Knee Clearance [4.32.3] Knee space at least 27 inches high is required for a depth of 19 inches. The over-the-surface reach is limited to 25 inches if at...
-
The Perils Of Slope
Requires the Registered User plan or above. Login! -
Allegion Falcon 2390 Series Recessed Exit Device
The best available recessed concealed device for stile and rail doors....
-
Allegion Von Duprin 98/99 Series Exit Devices
It is intended that the information included in this publication, when properly used, will provide clear and reliable guidelines to the proper general selection and application....
-
T204.2 Doorways with Lifts, Ramps or Bridgeplates
Doorways with lifts or ramps shall comply with T502.2.
-
11B-804.6.5.2 Bottom-hinged door ovens
Bottom-hinged door ovens shall have the work surface required by Section 11B-804.3 positioned adjacent to one side of the door....
-
11B-804.6.5.2 Bottom-hinged door ovens
Bottom-hinged door ovens shall have the work surface required by Section 11B-804.3 positioned adjacent to one side of the door....
-
PRL Glass Systems Inc. Panic Device PL-100 Series
These panic are a contemporary design offered primarily for all Glass Door/Entrance Systems with a minimal latch mechanism....
-
Yale 1500 Series Traditional Exit Devices
Lever, knob, handle and pull trim designs offer variety and permit hardware balance throughout a building 2-point hex-key dogging for standard devices allows quiet push-pull door...
-
11B-804.6.5.1 Side-hinged door ovens
Side-hinged door ovens shall have the work surface required by Section 11B-804.3 positioned adjacent to the latch side of the oven door....
-
11B-804.6.5.1 Side-hinged door ovens
Side-hinged door ovens shall have the work surface required by Section 11B-804.3 positioned adjacent to the latch side of the oven door....
-
Allegion Von Duprin 88 Series Cross Bar Exit Device
Exit devices are a critical part of a door opening or access system and will provide safe and reliable service when properly applied and maintained....
-
Allegion Falcon 1790 Series Exit Devices
standard, except EL where must use hold back feature Cylinder: Rim, key entry (NL) or hold back (HB) available (field selectable) Sizes: 30", 36", 42", and 48" Doors...
-
Allegion Falcon 1490 Series Exit Devices
Sizes: 36", 42", 48" Doors: 1 3/4" thick metal doors-specify if other than 1 3/4" Projections: 2 3/4" maximum, 2" when dogged....
