barriers incorporate elements that cannot comply with these requirements such as certain metal detectors, fluoroscopes, or other similar devices, the accessible route shall be permitted to be located...
Search Results "Seat Location"
-
11B-206.8 Security barriers
-
1.1.3 Scope
The provisions of this code shall apply to the construction, alteration, movement, enlargement, replacement, repair, equipment, use and occupancy, location, maintenance, removal and demolition...
-
11B-808.3 Clear floor space
Exception: In alterations, wheelchair spaces are not required to be located within the defined area of raised jury boxes or witness stands and shall be permitted to be located outside these...
-
F208.2.1 Hospital Outpatient Facilities
The term "outpatient facility" is not defined in this document but is intended to cover facilities or units that are located in hospitals and that provide regular and continuing medical...
-
407.8.2.2 Obstructed Side Reach
Where the operable part is located more than 10 inches (255 mm), but not more than 24 inches (610 mm), beyond the vertical reference plane, the height of the operable part shall be 46 inches...
-
R308.1 Transit Stops
Transit stops should be located so that there is a level and stable surface for boarding vehicles....
-
Q. Must an employer modify existing facilities to make them accessible?
For example, if an employee lounge is located in a place inaccessible to a person using a wheelchair, the lounge might be modified or relocated, or comparable facilities might be provided...
-
11B-808.3 Clear floor space
Exception: In alterations, wheelchair spaces are not required to be located within the defined area of raised jury boxes or witness stands and shall be permitted to be located outside these...
-
11B-808.3 Clear floor space
Exception: In alterations, wheelchair spaces are not required to be located within the defined area of raised jury boxes or witness stands and shall be permitted to be located outside these...
-
208.2.1 Hospital Outpatient Facilities
The term "outpatient facility" is not defined in this document but is intended to cover facilities or units that are located in hospitals and that provide regular and continuing medical...
-
413.1.2 Audio Description Controls (Section-by-Section Analysis)
This proposed section would require that, where video-capable hardware provides controls for program selection, such ICT must have user controls for audio description in at least one location...
- Just Manufacturing Deck Mounted Classroom Faucet with Vandal Resistant Lever Handle
- Just Manufacturing Classroom Concealed Ledgemount Single Handle Restricted Swing Faucet
- KirbyBuilt Maxwell Recycled Plastic Picnic Table
-
11B-201.1 Scope
The 1991 Standards and the 2010 Standards apply to fixed or built-in elements of buildings, structures, site improvements, and pedestrian routes or vehicular ways located on a site....
-
11B-703.3.2 Position
Exception: Braille provided on elevator car controls shall be separated 3/16 inch (4.8 mm) minimum and shall be located directly below the corresponding raised characters or symbols....
-
1028.5 Access to a public way
For other than Group E buildings, the area shall be located on the same lot not less than 50 feet (15 240 mm) away from the building requiring egress....
-
11B-201.1 Scope
The 1991 Standards and the 2010 Standards apply to fixed or built-in elements of buildings, structures, site improvements, and pedestrian routes or vehicular ways located on a site....
-
11B-703.3.2 Position
Exception: Braille provided on elevator car controls shall be separated 3/16 inch (4.8 mm) minimum and shall be located directly below the corresponding raised characters or symbols....
- Merlexi Craft™ Liberty MRI Wheelchairs
-
Studies of Wheeled Mobility Devices and Transferring Abilities
The safest and most easily accessible transfers are those with no or very little horizontal and vertical distance between the seat of the wheelchair and the transfer surface....
- Takeform Fusion Signage Overheads Type C.2
-
Floor Designations
In the final rule, this specification, now located at section 407.2.3.1, applies the mounting height generally required for other types of tactile signs by 703.2 (48 to 60 inches above the...
-
407.12.2.2 Obstructed Side Reach
Where the operable part is located more than 10 inches (255 mm), but not more than 24 inches (610 mm), beyond the vertical reference plane, the height of the operable part shall be 46 inches...