Transfer Steps Transfer steps are level surfaces in a composite structure that can be used for transferring from different levels to access play components....
Search Results "Loose Fill Surface"
Commonly Searched Documents
-
Transfer Steps
-
308.3.1 Unobstructed
Operable parts of fuel dispensers shall be permitted to be 54 inches (1370 mm) maximum measured from the surface of the vehicular way where fuel dispensers are installed on existing curbs...
-
A10.3.1(7) Route Signs
One means of making control buttons on fare vending machines usable by persons with vision impairments is to raise them above the surrounding surface....
-
7.4.11.2 Sign Contents
constructed or altered trails, regardless of whether the trail is accessible, the signs shall include at minimum the following information: Length of the trail or trail segment Surface...
-
Detectable Warnings [4.29]
ADAAG originally required detectable warnings on curb ramps, at areas where walking surfaces blend with vehicular ways without curb separation, railings, or other elements, and at the edges...
-
Constructed Features in Recreation Sites
If constructed features are replaced, but the ground under the feature isn't changed, the surface and slope of the ground under the feature doesn't have to be brought into conformance with...
-
1013.2 Clear Ground Space
This section also requires the surface of the clear ground space to be firm and stable and to allow the use of tent stakes or other tent securement devices....
-
Selection of Participants
investigators at OSU were to pilot test the survey instruments with professional contacts in parks and recreation that manage pedestrian trails designed, developed, and maintained with the natural surface...
-
1016.4 Passing Spaces
inches (1525 mm), where the route is: • Heavily used or adjoins elements, space, or facilities that are heavily used; or • A boardwalk or otherwise not at the same level as the ground surface...
-
1134A.5, Item 1
The edge of the clear floor space shall be flush with the control wall surface....
-
11B-1009.4.5 Grab bars
The top of the gripping surface shall be 4 inches (102 mm) minimum and 6 inches (152 mm) maximum above transfer walls....
-
11B-1009.4.5 Grab bars
The top of the gripping surface shall be 4 inches (102 mm) minimum and 6 inches (152 mm) maximum above transfer walls....
-
Section 35.151(g)(3)
In addition, Sec. 35.151(g)(3) clarifies that facilities may fill in wheelchair spaces with removable seats when the wheelchair spaces are not needed by persons who use wheelchairs....
-
Clear Floor Space: ADA Standard Section 606.2
Section 606.2 covers the current ADA Standards for clear floor space at lavatories and sinks.
-
11B-604.8.1.4 Toe clearance
Partition components at toe clearances shall be smooth without sharp edges or abrasive surfaces....
- Bradley Terreon Classroom Sink TCS Series
- Rakks® Wall Mounted Standards with Rakks® Brackets
- Inclusion Solutions Model 2000 Voting Booth with Light (Hard Curtain)
- Inclusion Solutions Model 2000 Voting Booth (Hard Curtain)
- Inclusion Solutions Poll Star Voting Booth
-
1007.3.2 Golf Club Reach Range Area
This includes accessible routes provided adjacent to or, where provided, on the playing surface of the hole. Figure 1007.3.2 Golf Club Reach Range Area...
-
1009.4.5 Grab Bars
The top of the gripping surface shall be 4 inches (100 mm) minimum and 6 inches (150 mm) maximum above transfer walls....
-
1003.2.12.2 Opening limitations
From a height of 34 inches (864mm) to 42 inches (1067mm) above the adjacent walking surfaces, a sphere 8 inches (203mm) in diameter shall not pass....