An accessible route complying with Division 4 shall be provided to the ground- or floor-level entry points, where provided, of stairs, ladders, or other means of reaching the raised elements...
Search Results "Court Floor Holding Cell"
Filters
Commonly Searched Documents
-
11B-203.14 Raised diving boards and diving platforms
-
1133A.2, Item 2
A clear floor space at least 30 inches (762 mm) by 48 inches (1219 mm) that allows either a parallel or forward approach shall be provided at the kitchen sink and all other fixtures or appliances...
-
11B-604.8.3 Coat hooks and shelves
Shelves shall be located 40 inches (1016 mm) minimum and 48 inches (1219 mm) maximum above the finish floor....
-
11B-605.2 Height and depth
Urinals shall be the stall-type or the wall-hung type with the rim 17 inches (432 mm) maximum above the finish floor or ground....
-
11B.707.7.1.3 Horizontally mounted display screen
from the viewer 60 degrees to 90 degrees (horizontal) from vertical, the center line of the display screen and other display devices shall be no more than 34 inches (864 mm) above the floor...
-
11B-203.14 Raised diving boards and diving platforms
An accessible route complying with Division 4 shall be provided to the ground- or floor-level entry points, where provided, of stairs, ladders, or other means of reaching the raised elements...
-
Tips for Assisting People Who Are Deaf, Hard of Hearing, or Deaf-Blind
More specifically, hold the deaf-blind person’s hand the same way each time, so the top and bottom letter falls in the same place....
-
Detecto BRW1000 Portable Wheelchair Scale
The scale’s four USA-made stainless steel load cells feature self-aligning feet, so when the scale comes to rest from transport mode, it will find the most level surface for weighing....
-
Panda S.15 All Wood with Aluminum Core Lift & Slide System
Panda holds a patent for the drainage technology used in this track. Trench Depth: Min. 1 1/2″ 1 1/4″ Recessed track. ...
-
Panda S.12 Solid Wood Lift & Slide System
Panda holds a patent for the drainage technology used in this track. Trench Depth: Min. 1 1/4″ ADA Compliant 1 1/4″ in track. ...
-
Tile Tech Pavers® Porcelain Pavers™ Series
Until recently, porcelain pavers have mostly been used for traditional interior tiling purposes on both floors and walls....
-
Wilkinson Hi-Rise Trash Chute
The floor frames of the chute are typically equipped with sound isolator pads at each floor connection point to isolate the chute from the floor of the structure....
-
Reasonable Accommodation Process Illustrated
No carts are currently available at the company, and those that can be purchased by the company are the wrong shape to hold many of the bulky and irregularly shaped sacks that must be moved...
-
Issue 11: Good vibrations (vibrotactile indications)
If the plate holding the arrow is screwed in, over-tightening the screws can prevent the vibration....
-
5.4.1 Transfer Support Location for M301 and M302
Rationale for the recommendation Transfer supports or handholds on adjustable medical equipment facilitate transfers onto a transfer surface by giving the individual something to hold...
-
Section 36.404 Alterations: Elevator Exemption (Preamble, Section-by-Section Analysis)
) a building housing five or more sales or rental establishments, or (2) a series of buildings on a common site, connected by a common pedestrian access route above or below the ground floor...
-
604.8.3 Coat Hooks and Shelves
Shelves shall be located 40 inches (1015 mm) minimum and 48 inches (1220 mm) maximum above the finish floor. [ECTCR UFAS 4.25.3, Fig. 38, 4.23.9, 4.34.5.3(3)]...
-
11B-804.3.2 Height
The kitchen work surface shall be 34 inches (864 mm) maximum above the finish floor or ground....
-
1007.8.2 Directions
Directions for the use of the two-way communication system, instructions for summoning assistance via the two-way communication system and written identification of the specific story, floor...
-
405.9.2 Curb or Barrier
A curb or barrier shall be provided that prevents the passage of a 4 inch (100 mm) diameter sphere, where any portion of the sphere is within 4 inches (100 mm) of the finish floor or ground...
-
803.5 Coat Hooks and Shelves
Shelves shall be 40 inches (1015 mm) minimum and 48 inches (1220 mm) maximum above the finish floor or ground. [ECTCR UFAS 4.25.3, Fig. 38]...
-
804.3.2 Height
The kitchen work surface shall be 34 inches (865 mm) maximum above the finish floor or ground....
-
G. Self-serve Items
If a counter is used for serving breakfast or other food products, does it have at least a 36" long section that is no higher than 36" above the floor to allow persons who use wheelchairs...
-
405.9.2 Curb or Barrier
A curb or barrier shall be provided that prevents the passage of a 4 inch (100 mm) diameter sphere, where any portion of the sphere is within 4 inches (100 mm) of the finish floor or ground...
