Does each accessible toilet have a horizontal grab bar on the wall behind the toilet that is at least 36" long and between 33"-36" above the floor for stabilization and assistance during...
Search Results "Court Floor Holding Cell"
Filters
Commonly Searched Documents
-
F. Grab Bars
-
308.2.1 Unobstructed
Where a forward reach is unobstructed, the high forward reach shall be 48 inches (1220 mm) maximum and the low forward reach shall be 15 inches (380 mm) minimum above the finish floor or...
-
1132A.4, Item 1
., concrete, brick, flagstone) serving primary entry doors and required exit doors are limited to not more than ½ inch (12.7 mm) of change in height between floor surfaces....
-
306.3.4 Clearance Reduction
Between 9 inches (230 mm) and 27 inches (685 mm) above the finish floor or ground, the knee clearance shall be permitted to reduce at a rate of 1 inch (25 mm) in depth for each 6 inches...
-
803.5 Coat Hooks and Shelves
Shelves shall be 40 inches (1015 mm) minimum and 48 inches (1220 mm) maximum above the finish floor or ground....
-
407.12.3.1 Unobstructed Forward Reach
maximum protrusion within the length of the vertical reference plane of the ICT, the operable part shall be 48 inches (1220 mm) high maximum and 15 inches (380 mm) high minimum above the floor...
-
1132A.4, Item 1
., concrete, brick, flagstone) serving primary entry doors and required exit doors are limited to not more than ½ inch (12.7 mm) of change in height between floor surfaces....
-
11B-203.14 Raised diving boards and diving platforms
An accessible route complying with Division 4 shall be provided to the ground- or floor-level entry points, where provided, of stairs, ladders, or other means of reaching the raised elements...
-
1133A.2, Item 2
A clear floor space at least 30 inches (762 mm) by 48 inches (1219 mm) that allows either a parallel or forward approach shall be provided at the kitchen sink and all other fixtures or appliances...
-
11B-604.8.3 Coat hooks and shelves
Shelves shall be located 40 inches (1016 mm) minimum and 48 inches (1219 mm) maximum above the finish floor....
-
11B-605.2 Height and depth
Urinals shall be the stall-type or the wall-hung type with the rim 17 inches (432 mm) maximum above the finish floor or ground....
-
11B.707.7.1.3 Horizontally mounted display screen
from the viewer 60 degrees to 90 degrees (horizontal) from vertical, the center line of the display screen and other display devices shall be no more than 34 inches (864 mm) above the floor...
-
11B-203.14 Raised diving boards and diving platforms
An accessible route complying with Division 4 shall be provided to the ground- or floor-level entry points, where provided, of stairs, ladders, or other means of reaching the raised elements...
-
Tips for Assisting People Who Are Deaf, Hard of Hearing, or Deaf-Blind
More specifically, hold the deaf-blind person’s hand the same way each time, so the top and bottom letter falls in the same place....
-
Reasonable Accommodation Process Illustrated
No carts are currently available at the company, and those that can be purchased by the company are the wrong shape to hold many of the bulky and irregularly shaped sacks that must be moved...
-
Issue 11: Good vibrations (vibrotactile indications)
If the plate holding the arrow is screwed in, over-tightening the screws can prevent the vibration....
-
5.4.1 Transfer Support Location for M301 and M302
Rationale for the recommendation Transfer supports or handholds on adjustable medical equipment facilitate transfers onto a transfer surface by giving the individual something to hold...
-
Door King Inc. 1837 PC Programmable Telephone Entry and Access Control System
Additionally, our elevator control module restricts which floors a guest or system users have access to, making it an ideal system for high rise buildings. Â ...
-
Section 36.404 Alterations: Elevator Exemption (Preamble, Section-by-Section Analysis)
) a building housing five or more sales or rental establishments, or (2) a series of buildings on a common site, connected by a common pedestrian access route above or below the ground floor...
-
Seton Pavement Tool Plastic Graphic Stencils - ISA Symbol (California DOT) S-3048 D - PP261
One-piece stencils are easy to align 1/16" thick plastic holds its shape use-after-use Dry paint flakes off the plastic for easy cleaning Stencils easily roll up for storage Stencil...
-
Bobrick Surface-Mounted Toilet Tissue Dispenser with Hood B-6699
Chrome- plated plastic spindle holds rolls up to 5 1/8" (130mm) diameter (1500 sheets)....
-
Seton Pavement Tool Plastic Graphic Stencils - ISA Symbol (Texas DOT) S-3148 D - PP262
storage Stencil measures 41-1/4"W x 4" Bar x 48"H with ISA symbol Meets Texas DOT specs One-piece stencils are easy to align 1/16" thick plastic holds...
-
Bobrick B-30919 ClassicSeries® Surface-Mounted Toilet Tissue, Seat-Cover Dispenser and Waste Disposal
Toilet seat-cover dispenser holds 500 paper covers. Removable waste disposal for servicing. Capacity: 0.4-gal. (1.5-L). Patent Pending....
-
604.8.3 Coat Hooks and Shelves
Shelves shall be located 40 inches (1015 mm) minimum and 48 inches (1220 mm) maximum above the finish floor. [ECTCR UFAS 4.25.3, Fig. 38, 4.23.9, 4.34.5.3(3)]...
