Assembly areas shall provide wheelchair spaces, companion seats, and designated aisle seats complying with F221 and 802. In addition, lawn seating shall comply with F221.5....
Search Results "Centered Clear Floor Space"
-
F221.1 General
-
221.1 General
Assembly areas shall provide wheelchair spaces, companion seats, and designated aisle seats complying with 221 and 802. In addition, lawn seating shall comply with 221.5....
-
5.9.2.1 Standing Supports on Single Ramped Entry Raised Platforms with Wheelchair Spaces Recommendations
5.9.2.1 Standing Supports on Single Ramped Entry Raised Platforms with Wheelchair Spaces Recommendations The Committee recommends standing supports located on both sides of platforms,...
-
M303.2.4.2 Knee Clearance
Knee clearance shall be provided at a depth of 11 inches (280 mm) minimum and 25 inches (635 mm) maximum at 9 inches (230 mm) above the floor and at a depth of 8 inches (205 mm) minimum...
-
Performance Areas
route must connect stages and other performance areas directly to seating areas where they are directly connected by a circulation path as well as to dressing rooms and other ancillary spaces...
-
How are accessible passenger loading zone aisles to be marked?
Vehicle pull-up spaces are not required to be marked....
-
1017.5 Tread Obstacles
This section contains technical requirements for tread obstacles on trails, passing spaces, and resting intervals....
-
§ 35.138(a)(1)
(1) For the purposes of this section, “accessible seating” is defined as wheelchair spaces and companion seats that comply with sections 221 and 802 of the 2010 Standards along with any...
-
4.6.2 LOCATION
Parking spaces for disabled people and accessible passenger loading zones that serve a particular building shall be the spaces or zones located closest to the nearest accessible entrance...
-
§ 35.151(g)(2)
When wheelchair seating locations are not required to accommodate people who use wheelchairs, individual, readily removable seats may be placed in those spaces;...
-
11B-812.4 Vertical clearance
Vehicle spaces, access aisles serving them, and vehicular routes serving them shall provide a vertical clearance of 98 inches (2489 mm) minimum....
-
11B-812.4 Vertical clearance
Vehicle spaces, access aisles serving them, and vehicular routes serving them shall provide a vertical clearance of 98 inches (2489 mm) minimum....
-
Accessible Routes within a Site [§206.2.2]
a Site [§206.2.2] At least one accessible route within the boundary of the site originating from site arrival points must connect all accessible buildings, facilities, elements, and spaces...
-
Highway standards suggesting possible applications for pedestrian surfaces
ASTM E 950-98(2004) Standard test method for measuring the longitudinal profile of traveled surfaces with an accelerometer established inertial profiling...
-
United States of America v. State of Florida - Final Order of Dismissal
., §4478 (2d. ed. 2016) ("it is clear that all federal courts retain power to reconsider if they wish"). ...
-
Section D: Entrances
_________________________ Location name:______________________ D Polling Place Entrances Yes No N/A Comments/Remedies D1 Is the clear...
-
11B-705.1.2.2.2.1 One entrance/exit point
Where the turning space has one entrance/exit point other than the sloped ramp segments, detectable warnings shall be 36 inches (914 mm) deep, as measured perpendicular to the curb, and...
-
Gates and Barriers
That section requires 36 inches (915 millimeters) of clear width....
-
11B-604.8.1.1 Size
shall be 60 inches (1524 mm) wide minimum measured perpendicular to the side wall, and 56 inches (1422 mm) deep minimum for wall hung water closets and 59 inches (1499 mm) deep minimum for floor...
-
F221.2.1.4 Team or Player Seating
At least one wheelchair space complying with 802.1 shall be provided in team or player seating areas serving areas of sport activity....
-
221.2.1.4 Team or Player Seating
At least one wheelchair space complying with 802.1 shall be provided in team or player seating areas serving areas of sport activity....
-
6.4
6.4 Wheelchair locations and companion seats shall be aligned horizontally so that they are shoulder-to-shoulder with each other and with other seats in the same row.
-
11B-603.2 Clearances
Clearances shall comply with Section 11B-603.2.