thicknesses such as flooring materials or wall coverings must be considered when reviewing critical accessibility features, including but not limited to, widths of halls, corridors, door strike side...
Search Results "Side Grab Bar"
-
CASI Accessibility Construction Inspection Checklist
-
CALBO Accessibility Construction Inspection Checklist
thicknesses such as flooring materials or wall coverings must be considered when reviewing critical accessibility features, including but not limited to, widths of halls, corridors, door strike side...
-
Horizontal Alignment
Indeed, if a curve is so sharp as to make a path user uncomfortable, the user may understeer and run off the side of the path....
-
4.3.5.2 180-degree turn
The other side of the hallway had a moveable wall. The hallway width was incrementally increased until a user could enter the space, turn around, and exit the space successfully....
-
4.1.1(5)
(c) Parking spaces for side lift vans are accessible parking spaces and may be used to meet the requirements of this paragraph....
-
Section 37.121 Requirement for Comparable Complementary Paratransit Service
Publicly operated dial-a-ride vans, service contracted out to a private paratransit provider, user-side subsidy programs, or any combination of these and other approaches is acceptable....
-
1132A.4 Level floor or landing
The floor or landing on each side of a door shall be level....
- The GRIT Freedom Chair
-
804 Kitchens and Kitchenettes
804.5) operable parts of appliances (804.6.2) oven controls (804.6.5) Clearances for pass through kitchens address counters, appliances, or cabinets on two opposing sides...
-
Alterations and Water Closet Clearances in Single-User Toilet Rooms With In-Swinging Doors (Section-by-Section Analysis)
In-Swinging Doors (Section-by-Section Analysis) The 1991 Standards allow a lavatory to be placed a minimum of 18 inches from the water closet centerline and a minimum of 36 inches from the side...
-
M307 Operable Parts
For an unobstructed forward reach or side reach, the reach ranges are 48 inches maximum for a high reach and 15 inches minimum for a low reach....
-
Vertical Dispersion: ADA Standard Section 221.2.3.2
Section 221.2.3.2 covers scoping requirements in the current ADA Standards for vertical dispersion in assembly areas.
-
F105.2.3 ASTM
Copies of the referenced standards may be obtained from the American Society for Testing and Materials, 100 Bar Harbor Drive, West Conshohocken, Pennsylvania 19428 (http://www.astm.org)....
-
Preliminary Guidelines for Vitri-Turf SEWF Installation
Dump mixture onto site and apply binder-EWF mixture to a thickness (uncompacted) of about 75 mm (3 in.) using a screed bar or rake....
-
105.2.3 ASTM
Copies of the referenced standards may be obtained from the American Society for Testing and Materials, 100 Bar Harbor Drive, West Conshohocken, Pennsylvania 19428 (http://www.astm.org)....
-
105.2.3 ASTM
Copies of the referenced standards may be obtained from the American Society for Testing and Materials, 100 Bar Harbor Drive, West Conshohocken, Pennsylvania 19428 (http://www.astm.org)....
-
Place of Public Accommodation
A restaurant, bar, or other establishment serving food or drink; (3) Places of exhibition or entertainment....
-
Section 1630.9 Not Making Reasonable Accommodation
For example, if a law firm requires that all incoming lawyers have graduated from an accredited law school and have passed the bar examination, the law firm need not provide an accommodation...
-
Mark J. Mazz, AIA: Architectural Consultant on Accessibility
And then you have more borrowed light coming in from the west side....
-
11B-212.3 Sinks
The ADA requirements and exceptions make no mention of wet bars, scullery sinks or scrub sinks. ...
-
11B-212.3 Sinks
The ADA requirements and exceptions make no mention of wet bars, scullery sinks or scrub sinks. ...
-
Expert Report of Douglas J. Anderson, RAS, CASP, LCM Architects (August 8, 2018)
Sidewalks & Walkways: The exterior ramp does not include handrails on each side of the ramp (1991 ADA Stds 4.8.5; 2010 ADA Stds 405.8, 505.2)....
-
Polling place violations that can be remediated with temporary measures
Building Entrance: The pull side of the entrance door does not provide at least 18 inches clearance to the side of the latch (1991 ADA Stds 4.13.6, Fig. 25; 2010 ADA Stds 404.2.4)...
-
Expert Report of Ken Schoonover, P.E., KMS Associates, Inc. (August 7, 2018)
Hallways & Corridors: The pull side of the interior door does not provide at least 18 inches clearance to the side of the latch (1991 ADA Stds 4.13.6, Fig. 25; 2010 ADA Stds 404.2.4)...