Selection of Participants The principal investigators at OSU were to pilot test the survey instruments with professional contacts in parks and recreation that manage pedestrian trails...
Search Results "Pedestrian Facility"
Commonly Searched Documents
-
Selection of Participants
-
4.7.10 DIAGONAL CURB RAMPS
If diagonal (or corner type) curb ramps have returned curbs or other well-defined edges, such edges shall be parallel to the direction of pedestrian flow....
-
§100.205(e)(2)(v) 2003 International Building Code (IBC)
the 2003 IBC stating, “ICC interprets Section 1104.1, and specifically, the Exception to Section 1104.1, to be read together with Section 1107.4, and that the Code requires an accessible pedestrian...
-
1.1.8 Alternate measurement tools
If the F - number system is used pedestrian paths should have a minimum FF of 25. Running slope should be measured along the same lines of measurements as given in Section 1.1.3....
-
1.1.7 Measurement of parking areas
These areas should be considered as a pedestrian walk with a minimum width of 60 in. and a length of approximately 20 ft and with an ADA/ABA - AG maximum slope of 1:48 in both directions...
-
Detectable Warning Surfaces on Curb Ramps (Section-by-Section Analysis)
The Access Board deferred addressing detectable warning surfaces on curb ramps in the 2004 ADA and ABA Accessibility Guidelines pending completion of the guidelines for pedestrian facilities...
-
Speed
The AASHTO Guide for the Development of Bicycle Facilities (p. 36) recommends a minimum design speed of 30 km/h (20 mi/h) for shared use paths.(2) Table 12 shows that the mean speed for...
-
(1) Site impracticality
The first test is an individual building test which involves a two-step process: measurement of the slope of the undisturbed site between the planned entrance and all vehicular or pedestrian...
-
Storage: ADA Standard Section 804.5
At least 50 percent of shelf space in storage facilities shall comply with 811....
-
VEHICULAR WAY
[DSA-AC] A route provided for vehicular traffic, such as in a street, driveway, or parking facility....
- Trimco LDH100 Series Lockdown Hardware
-
Administrative Authority
A governmental agency that adopts or enforces regulations and guidelines for the design, construction, or alteration of buildings and facilities....
-
Service Entrances: ADA Standard Section 206.4.8
Section 206.4.8 covers scoping requirements in the most current ADA Standards for accessible routes to service entrances.
-
ADDITION
[DSA-AC] An expansion, extension or increase in the gross floor area or height of a building or facility....
-
Shower Spray Unit and Water: ADA Standard Section 608.6
Section 608.6 covers the current ADA Standards for the shower spray units and water in shower compartments.
-
Site Impracticality Determinations
arrival points; and measurement of the slope of the planned finished grade between the entrance and all vehicular or pedestrian arrival points....
-
A. DEFINITIONS AND BACKGROUND
buildings or facilities in such a manner that those buildings or facilities meet the requirements of title III of the ADA, including the Standards. 3....
-
11B-804.5 Storage
At least 50 percent of shelf space in storage facilities shall comply with Section 11B-811....
-
WET BAR
[DSA-AC] An area or space with a counter equipped with a sink and running water but without cooking facilities....
-
General: ADA Standard Section 216.1
Section 216.1 of the ADA Standards covers information in the current ADA Standards on scoping requirements for signs.
-
11B-812 Electric vehicle charging stations
obligation for governments to make their services, programs or activities available to individuals with disabilities [ADA Title II §35.130], and for public accommodations and commercial facilities...
-
[ADA Title III §36.403(b)] Primary function
A "primary function" is a major activity for which the facility is intended....
-
Spaces and Elements: ADA Standard Section 206.2.4
Section 206.2.4 covers the scoping requirements in the most current ADA Standards for accessible routes connecting spaces and elements within a building.
-
R310 Passenger Loading Zones (Section-by-Section Analysis)
The access aisle must be 1.5 meters (5 feet) wide minimum, extend the entire length of the vehicle pull-up space, and connect to the pedestrian access route....