—The definition of ‘disability’ in paragraph (1) shall be construed in accordance with the following:...
Search Results "Grade 1 Braille"
Filters
Commonly Searched Documents
-
12102(4) Rules of construction regarding the definition of disability
-
11B-411.4.11.1 Height
Floor destination characters shall be 1 inch (25 mm) high minimum complying with Section 11B-703.5.3....
-
410.4.1 Wireless Handsets
ICT in the form of wireless handsets shall conform to ANSI/IEEE C63.19-2011 (incorporated by reference in Chapter 1)....
-
4.8.6 Cross Slope and Surfaces
The cross slope of ramp surfaces shall be no greater than 1:50. Ramp surfaces shall comply with 4.5....
-
4.8.6 CROSS SLOPE AND SURFACES
The cross slope of ramp surfaces shall be no greater than 1:50. Ramp surfaces shall comply with 4.5....
-
11B-411.4.11.1 Height
Floor destination characters shall be 1 inch (25 mm) high minimum complying with Section 11B-703.5.3....
-
11B-409.4.3 Platform to hoistway clearance
The clearance between the car platform and the edge of any landing sill shall be 1½ inch (38 mm) maximum....
-
11B-410.4 Platform to runway clearance
The clearance between the platform sill and the edge of any runway landing shall be 1¼ inch (32 mm) maximum....
-
11B-703.2.1 Depth
Raised characters shall be 1/32 inch (0.8 mm) minimum above their background....
-
11B-410.4 Platform to runway clearance
The clearance between the platform sill and the edge of any runway landing shall be 1¼ inch (32 mm) maximum....
-
SIGN
[HCD 1-AC, DSA-AC] An element composed of displayed textual, verbal, symbolic, tactile, and/or pictorial information....
-
11B-409.4.3 Platform to hoistway clearance
The clearance between the car platform and the edge of any landing sill shall be 1½ inch (38 mm) maximum....
-
11B-411.4.11.1 Height
Floor destination characters shall be 1 inch (25 mm) high minimum complying with Section 11B-703.5.3....
-
(C) NYCT’s interpretation of the ADA and DOT’s implementing regulations is too narrow.
To address another argument presented by NYCT,1 the ADA Accessibility Guidelines (ADAAG) do not, as NYCT contends, limit the requirement that “a means of accessible vertical access” be provided...
-
405.2 Slope (Exception 2), 405.6 Rise (Exception)
The running slope of ramp runs must not be steeper than 1:12 and any ramp rise must be 30 inches maximum....
-
Birthing Room Bath Tub Accessibility
and can only 1 of the two bath tubs be accessible Consulted with Access Board and their opinion is that at least 1 room needs to have: - All room features fully accessible - Accessible...
-
Yale 1900 Series Traditional Door Closers
Features ANSI/BHMA Grade 3 Certified Spring power adjustment Aluminum alloy shell Regulating valve Rack & pinion operation Available...
-
Seton Florida State Fine Signs - $100 Fine F.S. 316.14
background to give emphasis on the message 12"W x 6"H signs are perfect for sign posts Signs are available in aluminum, steel and polyethylene materials Engineer-Grade...
-
BEST Door Lever Hardware Cylindrical Locks - 5K
• Builders Hardware Manufacturers Association: 5K series – Listed by BHMA for A156.2, Series 4000, Grade 2....
-
Seton Add-on Van Accessible Parking Sign
Washington state requirements Made from Aluminum, Steel, or Polyethylene materials for guaranteed durability Pick your choice of reflectivity option: Non-Reflective, Engineer-Grade...
-
Behavioral Safety Products #SF380 Ligature Resistant Metering Faucet
The hot and cold buttons are color coded and incorporate braille....
-
11B-1008.2.5.1 Ground level
Ramp runs connecting ground level play components shall have a running slope not steeper than 1:16....
-
11B-407.4.3 Platform to hoistway clearance
The clearance between the car platform sill and the edge of any hoistway landing shall be 1¼ inch (32 mm) maximum....
