Knee and toe clearance complying with 306 shall be provided....
Search Results "Door Maneuvering Clearance"
Filters
Commonly Searched Documents
-
902.2 Clear Floor or Ground Space
-
902.2 Clear Floor or Ground Space
Knee and toe clearance complying with 306 shall be provided....
-
Pilot Rock WPTS Square Frame Picnic Table Using Formed Steel Channel
Model WPTS 8 ft table offers clearances under the table top of 30" wide, 27" high, and 24" total knee and toe clearance (19" knee + 5" toe). Nominal seat height is 18". ...
-
Pilot Rock WPTS Square Frame Table Using Aluminum
Model WPTS 8 ft table offers clearances under the table top of 30" wide, 27" high, and 24" total knee and toe clearance (19" knee + 5" toe). Nominal seat height is 18". ...
-
Grab Bars
If only one bar is provided, the clearance must be a minimum of 24 inches on each side of the bar....
-
1009.4.5 Grab Bars
Where one grab bar is provided, clearance shall be 24 inches (610 mm) minimum on both sides of the grab bar....
-
Wheelchair Spaces (M303.2)
M303.2 includes technical criteria for orientation, width, depth, and knee and toe clearance at wheelchair spaces....
-
AISLE
., that provides clearances in in compliance with this code....
-
AISLE
., that provides clearances in compliance with this code....
-
Turnstiles and Security Gates at Entrances
For example, a store that has an inaccessible turnstile at the entrance but also has an exit door (with no turnstile) located near the cash register may be able to use the exit door as an...
-
Notification Devices: ADA Standard Section 806.3.2
Visible notification devices shall be provided to alert room occupants of incoming telephone calls and a door knock or bell....
-
Door King Inc. 6050 / 6100 Residential and Commercial Swing Gate Operator
The Model 6050 and 6100 operators are designed to operate vehicular swing gates in residential and commercial applications. These operators are designed so that they can be either...
-
What Other Accessibility Requirements Apply to Play Components?
Designers are encouraged to consider components with back support, increased space for maneuvering adjacent to the play component, and other features that promote independent use....
-
Are side flares required at curb ramps?
flares are essential in alterations when space for a top landing (36” deep min.) is not available; in this instance, side flares (1:12 max. slope) are necessary to accommodate wheelchair maneuvering...
-
Mounting Height and Location
door swing (703.4.2)....
-
A. Exterior Routes
[ADA Stds. 4.1.2(1)] Yes __ No __ N/A __ Comments: _________________________________________ 2. ...the accessible parking space access aisles and the exterior doors to the accessible...
-
902.2 Clear Floor or Ground Space
Knee and toe clearance complying...
-
11B-1002.5.3 Transfer entry
Where openings are provided for transfer to amusement ride seats, the openings shall provide clearance for transfer from a wheelchair or mobility aid to the amusement ride seat....
-
1002.5.3 Transfer Entry
Where openings are provided for transfer to amusement ride seats, the openings shall provide clearance for transfer from a wheelchair or mobility aid to the amusement ride seat....
-
1002.5.3 Transfer Entry
Where openings are provided for transfer to amusement ride seats, the openings shall provide clearance for transfer from a wheelchair or mobility aid to the amusement ride seat....
-
AISLE
., that provides clearances in in compliance with this code....
-
304.3.1 Circular Space
The space shall be permitted to include knee and toe clearance complying with 306....
-
11B-1002.5.3 Transfer entry
Where openings are provided for transfer to amusement ride seats, the openings shall provide clearance for transfer from a wheelchair or mobility aid to the amusement ride seat....
-
11B-1002.5.3 Transfer entry
Where openings are provided for transfer to amusement ride seats, the openings shall provide clearance for transfer from a wheelchair or mobility aid to the amusement ride seat....
