area, first-class or other passenger lounge provided by a U.S. or foreign carrier, or any common area of the terminal to which any passengers have access and that are owned, leased, or controlled...
Search Results "Pedestrian Traffic Control Button"
-
§27.71(i)(1)
-
J1
it is in an alcove) x 48 inches long in front of the drinking fountain and at least 27 inches high under the fountain so that a person using a wheelchair can get close to the spout and controls...
-
503.1 General (Section-by-Section Analysis)
section addresses specifications for non-Web software—that is, programs with a user interface that are executed on a computing platform—related to certain user preferences, interfaces, and controls...
-
Sec.36.213 Relationship of subpart B to subparts C and D of this part
The specific provisions, including the limitations on those provisions, control over the general provisions in circumstances where both specific and general provisions apply....
-
§ 37.123(e)(3)(ii)
(ii) Architectural barriers not under the control of the public entity providing fixed route service and environmental barriers (e.g., distance, terrain, weather) do not, standing alone,...
-
607.4.1.1 Back Wall
Each grab bar shall be installed 15 inches (380 mm) maximum from the head end wall and 12 inches (305 mm) maximum from the control end wall....
- AdLib, Inc. - Pittsfield, MA
-
Geometry Dash Lite - A Fast Paced Rhythm Challenge
With its simple one tap control system, the game is easy to understand but incredibly difficult to master....
-
Two-Way Communication
However, the Board has retained provisions it had included that clarify the application of requirements for operable parts in 309.4 to call controls (407.2.1) and car controls (407.4.6)....
-
11B-608.2.1 Transfer type shower compartments
Clearance of 36 inches (914 mm) wide minimum by 48 inches (1219 mm) long minimum measured from the control wall shall be provided....
-
11B-809.10.5.2 Reinforcement for grab bars
At the control end wall and head end wall, between 30 inches (762 mm) maximum to 38 inches (965 mm) minimum above the finish floor, extending 28 inches (711 mm) minimum from the front edge...
-
11B-809.10.5.2 Reinforcement for grab bars
At the control end wall and head end wall, between 30 inches (762 mm) maximum to 38 inches (965 mm) minimum above the finish floor, extending 28 inches (711 mm) minimum from the front edge...
- U.S. Tape Company, Inc. Digi-Pro
- Bobrick ClassicSeries Surface-Mounted Soap Dispenser B-2111
- Bobrick ClassicSeries Surface-Mounted Soap Dispenser B-2112
-
Shower/Tub Seat Mounting Location
If the seat is in the down position, it does put the user closer to the shower and water controls while using the shower, but if someone is standing in the shower the seat obstructs the...
- Crystal Sauna
-
1.9.1 Division of the State Architect - Access Compliance.
include, but are not limited to: reviewing stands, temporary classrooms, bleacher areas, exhibit areas, temporary banking facilities, temporary health screening services, or temporary safe pedestrian...
-
1.9.1 Division of the State Architect - Access Compliance.
include, but are not limited to: reviewing stands, temporary classrooms, bleacher areas, exhibit areas, temporary banking facilities, temporary health screening services, or temporary safe pedestrian...
-
J2
least 30 inches long x 48 inches wide (60 inches if it is in an alcove) for a side approach to the drinking fountain so that a person using a wheelchair can get close to the spout and controls...
-
11B-607.4.1.1 Back wall
Each grab bar shall be installed 15 inches (381 mm) maximum from the head end wall and 12 inches (305 mm) maximum from the control end wall....
-
§100.7(a)(1)(iii)
The power to take prompt action to correct and end a discriminatory housing practice by a third-party depends upon the extent of the person's control or any other legal responsibility the...
-
4.34.5.5(2) Seat
The seat shall be on the wall opposite the controls. The structural strength of seats and their attachments shall comply with 4.26.3....
-
11B-607.4.1.1 Back wall
Each grab bar shall be installed 15 inches (381 mm) maximum from the head end wall and 12 inches (305 mm) maximum from the control end wall....