The seat is made from the highest grade of ABS plastic which is both stain and chemical resistant. Stainless steel hinges provide unbreakable strength....
Search Results "Grade 2 Braille"
-
Big John Original Toilet Seat with Cover White 1W
-
Corbin Russwin Inc. ED4000 Series Narrow Stile Exit Device
Features Meets ANSI Grade 1 requirements Easy-to-use pushpad for quick egress and ADA compliance Low projection for barrier-free code compliance Heavy-duty...
-
Panda S.10 All Aluminum Lift & Slide System
Profiles: Manufactured from 6063-T5 extruded aluminum with a profile thickness of 2 3/4″ allowing for oversized panels....
-
DISABILITY
(2) Rules of construction. i....
-
DISABILITY
(2) Rules of construction. i....
-
1630.2(p)(1)
means, with respect to the provision of an accommodation, significant difficulty or expense incurred by a covered entity, when considered in light of the factors set forth in paragraph (p)(2)...
-
RECOMMEND
[DSA-AC, HCD 1 & HCD 2] Does not require mandatory acceptance, but identifies a suggested action that shall be considered for the purpose of providing a greater degree of accessibility...
-
§382.133(f)(4)
(4) The requirement to bring an adequate number of batteries as outlined in paragraph (h)(2) of this section and to ensure that extra batteries carried onboard to power the device are packaged...
-
11B-106.2 Terms defined in referenced standards
Terms not listed in Section 11B-106.5 and not defined in Chapter 2, Section 202, but specifically defined in a referenced standard, shall have the specified meaning from the referenced standard...
-
§ 36.601 Submitting official
official means the State or local official who – (1) Has principal responsibility for administration of a code, or is authorized to submit a code on behalf of a jurisdiction; and (2)...
-
Recreation Site
An area that is improved, developed, or otherwise identified for recreation and that has a development scale of 0, 1, 2, 3, 4, or 5 (See Forest Service Handbook 2309.13, Chapter 10 – Exhibit...
-
7.4.3.2 Cross Slope
Where the surface is paved or is elevated above the natural ground, the cross slope shall not be steeper than 1:48 (2 percent). ...
-
E102.7.2 ITU-T Recommendation E.161
Arrangement of digits, letters and symbols on telephones and other devices that can be used for gaining access to a telephone network, ITU – T Study Group 2, (February 2001), IBR proposed...
-
FAQ: How do I submit a job for the Job Board?
Click on the "FEEDBACK OR HELP" button that appears on every page of Corada. 2. Contact us via email....
-
§1630.2(p)(1) In general
means, with respect to the provision of an accommodation, significant difficulty or expense incurred by a covered entity, when considered in light of the factors set forth in paragraph (p)(2)...
-
33.
. § 12188(b)(2)(c), to vindicate the public interest....
-
§ 38.101(a)
(a) Any stepwell or doorway with a lift, ramp or bridge plate shall have, when the door is open, at least 2 footcandles of illumination measured on the step tread, ramp, bridge plate, or...
-
11B-609.2.1 Circular cross section
Grab bars with circular cross sections shall have an outside diameter of 1¼ inches (32 mm) minimum and 2 inches (51 mm) maximum....
-
11B-106.2 Terms defined in referenced standards
Terms not listed in Section 11B-106.5 and not defined in Chapter 2, Section 202, but specifically defined in a referenced standard, shall have the specified meaning from the referenced standard...
-
11B-810.10 Track crossings
Exception: Openings for wheel flanges shall be permitted to be 2½ inches (64 mm) maximum....
-
11B-810.10 Track crossings
Exception: Openings for wheel flanges shall be permitted to be 2½ inches (64 mm) maximum....
-
11B-106.2 Terms defined in referenced standards
Terms not listed in Section 11B-106.5 and not defined in Chapter 2, Section 202, but specifically defined in a referenced standard, shall have the specified meaning from the referenced standard...
-
505.7.1 Circular Cross Section
Handrail gripping surfaces with a circular cross section shall have an outside diameter of 1¼ inches (32 mm) minimum and 2 inches (51 mm) maximum....
-
Cal-Royal Products Swing Clear Hinges
Swing clear hinges are designed so that when the door is opened to 90 degrees, the door itself is completely out of the openeing. 2-ball bearing is recommended for average frequency doors...
