Edge protection in the form of a curb or barrier must prevent the passage of a 2-inch sphere where any portion of the sphere is within 2 inches of the dune crossing surface....
Search Results "Built-Up Curb Ramp"
-
Dune Crossings [1018.10]
- Outdoor Extreme Mobility Nomad All Terrain Power Wheelchair
- AquaTrek2 AQ-350 Aquatic Wheelchair
- AquaTrek2 AQ-250PC Aquatic Wheelchair
- AquaTrek2 AQ-150 Child Size Aquatic Wheelchair
-
Section 1194.23 Telecommunications Products (Preamble, Section-by-Section Analysis)
Another said telecommunications systems should be required to have TTY decoding capability built-in, to the maximum extent possible....
-
307.3 Post-Mounted Objects
EXCEPTION: The sloping portions of handrails serving stairs and ramps shall not be required to comply with 307.3. Figure 307.3 Post-Mounted Protruding Objects...
-
Submerged Depth
Where the sloped entry has a running slope greater than 1:20 (5%), a landing at both the top and bottom of the ramp is required....
-
11B-244.1 General
The CBC requires raised areas of the facility to provide access by ramp, special access lift or elevator. ...
-
Access to Performing Areas [4.33.5]
While handrails are not required on ramps adjacent to assembly seating, locating aisles (including those that are stepped) along walls will permit handrails on one side for the benefit of...
-
11B-244.1 General
The CBC requires raised areas of the facility to provide access by ramp, special access lift or elevator. ...
-
11B-244.1 General
The CBC requires raised areas of the facility to provide access by ramp, special access lift or elevator....
-
Accessible Routes
Any part of an accessible route with a slope greater than 1:20 (5%) is considered a ramp, which limits the slope to 1:12 (8.33%) maximum....
-
How can existing buildings be retrofitted to make them accessible?
At such facilities a separate ramp or an alternative entrance may have to be used. This may include adding an elevator or lift inside a two-story building....
-
F105.2.2 ASME
standard includes additional provisions for runway enclosures, electrical equipment and wiring, structural support, headroom clearance (which is 80 inches minimum), lower level access ramps...
-
11B-221.3 Companion seats
People purchasing a ticket for an accessible seat may purchase up to three additional seats for their companions in the same row and these seats must be contiguous with the accessible seat...
-
11B-221.3 Companion seats
People purchasing a ticket for an accessible seat may purchase up to three additional seats for their companions in the same row and these seats must be contiguous with the accessible seat...
-
2.Tax Deduction for Architectural and Transportation Barrier Removal (Section 190 of the Internal Revenue Code)
2.Tax Deduction for Architectural and Transportation Barrier Removal (Section 190 of the Internal Revenue Code) Any business may take a full tax deduction, up to $15,000 per year, for...
-
Tax Credits and Deductions
This credit can cover 50% of the eligible access expenditures in a year up to $10,250 (maximum credit of $5000)....
-
Maneuvering Clearance or Standby Power for Automatic Doors
power failure prevents the operation of the automatic door, a person with a disability could be trapped unless there is either adequate maneuvering room to open the door manually or a back-up...
-
11B-809.2.2 Turning space
However, the overlap of turning space must be limited to one segment of the T-turn so that back-up maneuvering is not restricted....
-
302.2 Carpet
A pile thickness up to ½ inch (13 mm) (measured to the backing, cushion, or pad) is allowed, although a lower pile provides easier wheelchair maneuvering....
-
Benches [1011.2]
bench itself, providing a bench with at least one armrest and back support that runs the full length of the bench is helpful to people who need the support or have difficulty standing up...
-
302.2 Carpet
A pile thickness up to 1/2 inch (13 mm) (measured to the backing, cushion, or pad) is allowed, although a lower pile provides easier wheelchair maneuvering....