Operable parts of fuel dispensers shall be permitted to be 54 inches (1370 mm) maximum measured from the surface of the vehicular way where fuel dispensers are installed on existing curbs...
Search Results "Unit of Measurement"
Filters
Commonly Searched Documents
-
308.3.2 Obstructed High Reach
-
308.3.2 Obstructed High Reach
Operable parts of fuel dispensers shall be permitted to be 54 inches (1370 mm) maximum measured from the surface of the vehicular way where fuel dispensers are installed on existing curbs...
-
Miniature Horses
(Miniature horses generally range in height from 24 inches to 34 inches measured to the shoulders and generally weigh between 70 and 100 pounds.)...
-
READILY ACHIEVABLE
action; the number of persons employed at the site; the effect on expenses and resources; legitimate safety requirements that are necessary for safe operation, including crime prevention measures...
-
Guestroom Doors
doorways (except shallow closets) into and within all guestrooms and suites (including guestroom bathrooms, kitchens, and connecting room doors) shall provide 32 inches of clear opening width measured...
-
11B-505.10.3 Bottom extension at stairs
The horizontal extension of a handrail shall be 12 inches (305 mm) long minimum and a height equal to that of the sloping portion of the handrail as measured above the stair nosings....
-
11B-308.3.2 Obstructed high reach
Operable parts of fuel dispensers shall be permitted to be 54 inches (1372 mm) maximum measured from the surface of the vehicular way where fuel dispensers are installed on existing curbs...
-
11B-308.3.2 Obstructed high reach
Operable parts of fuel dispensers shall be permitted to be 54 inches (1372 mm) maximum measured from the surface of the vehicular way where fuel dispensers are installed on existing curbs...
-
11B-703.7.2.6 Toilet and bathing facilities geometric symbols
Geometric symbols at entrances to toilet and bathing rooms shall be mounted at 58 inches (1473 mm) minimum and 60 inches (1524 mm) maximum above the finish floor or ground surface measured...
-
11B-703.8.4 Character height
Viewing distance shall be measured as the horizontal distance between the character and an obstruction preventing further approach towards the sign....
-
5.4.4 Transfer Support Distance from Transfer Surface Recommendations for M301 and M302
The gripping surface measurement is horizontal from the adjacent edge of the transfer surface (see figure 5.4.1). NPRM Proposed Provision: M305.2.1 Location....
-
PRAYER FOR RELIEF
Issuance of permanent injunction requiring Defendant to undertake remedial measures to mitigate the effects of Defendant's past and ongoing violations of Title II of the ADA, Section 504...
-
17. Tests and selection criteria
The recipient must select and administer tests so as best to ensure that the test will measure the handicapped person's ability to perform on the job rather than the person's ability to...
-
11B-703.8.4 Character height
Viewing distance shall be measured as the horizontal distance between the character and an obstruction preventing further approach towards the sign....
-
11B-703.8.4 Character height
Viewing distance shall be measured as the horizontal distance between the character and an obstruction preventing further approach towards the sign....
-
American Specialties 9013 Recessed Stainless Steel Baby Changing Station
ADA-compliant unit features welded stainless steel construction for long and reliable use. Exposed surfaces are satin finish....
-
Honeywell SpectrAlert Advance Selectable Output Devices
Standard and Low Frequency models available Plug-in design with minimal intrusion into backbox Tamper-resistance construction Field-selectable candela settings on wall and ceiling units...
-
Bobrick ClassicSeries Surface Mounted Seat-Cover Dispenser B-221
Unit 15 3/4" W, 11" H, 2" D (400 x 280 x 50mm). Allow 5" (125mm) minimum clearance from bottom of dispenser to top of any horizontal projection for filling dispenser from below unit....
-
Magnuson Group STILO Waste Receptacles
All STILO units include an internal rigid liner and removable tops....
-
Floor Requirement: ADA Standard Section 217.4.2
Section 217.4.2 covers scoping requirements in the current ADA Standards for TTYs on the floor of public and private buildings.
-
General: ADA Standard Section 239.1
Section 239.1 of the ADA Standards covers information in the current ADA Standards on scoping requirements for miniature golf facilities.
-
Referenced Standards: ADA Standard Section 105.2
Section 105.2 of the ADA Standards covers the most current information on the Referenced Standards listed throughout the ADA Standards.
-
Illumination: ADA Standard Section 408.4.5
Section 408.4.5 covers the current ADA Standards for the illumination of the elevator car in limited-use/limited-application elevators.
-
Required Clear Width: ADA Standard Section 307.5
Section 307.5 covers the current ADA Standards for protruding objects not reducing the required clear width of an accessible route.
