or custom basin cut-out Decorative trap covers conceal plumbing to prevent vandalism and allow for easy maintenance Basin and deck are constructed of vandal-resistant Terreon Solid Surface...
Search Results "Fire-Building Surface"
Commonly Searched Documents
- Bradley OmniDeck with Oval Handwashing Basin LD-3010-SL-TO1
- Symmetry Vertical Platform Lift VPC-SL
- ASI Global Partitions High Density Polyethylene Solid Plastic Toilet Partitions
- Allegion Von Duprin 98/99 Series Exit Devices
-
11B-202.1 General
Additions and alterations to existing buildings or facilities shall comply with Section 11B-202....
-
Height: ADA Standard Section 903.5
The top of the bench seat surface shall be 17 inches (430 mm) minimum and 19 inches (485 mm) maximum above the finish floor or ground....
-
11B-903.5 Height
The top of the bench seat surface shall be 17 inches (432 mm) minimum and 19 inches (483 mm) maximum above the finish floor or ground....
-
11B-813.2.1.1 Size
Adult changing tables shall have a changing surface of 70 inches (1778 mm) minimum length and 30 inches (762 mm) minimum width....
-
1127B.5, Item 4
A level landing 4 feet (1219 mm) deep shall be provided at the upper end of each curb ramp over its full width to permit safe egress from the ramp surface, or the slope of the fanned or...
-
Implementation Challenges for Interiors (slides 16 and 17)
Can we bring that into the building somehow and require that strip at every stair in an egress stairwell? Protruding objects....
-
11B-812.8.7 Location
Signs shall be 60 inches (1525 mm) minimum above the finish floor or ground surface measured to the bottom of the sign....
-
Platform Edges: ADA Standard Section 705.2
Detectable warning surfaces at platform boarding edges shall be 24 inches (610 mm) wide and shall extend the full length of the public use areas of the platform....
-
Transfer Height: ADA Standard Section 1002.6.2
The height of transfer device seats shall be 14 inches (355 mm) minimum and 24 inches (610 mm) maximum measured from the load and unload surface....
-
11B-1002.6.2 Transfer height
The height of transfer device seats shall be 14 inches (356 mm) minimum and 24 inches (610 mm) maximum measured from the load and unload surface....
-
11B-705.1.2.1 Platform edges
Detectable warning surfaces at platform boarding edges shall be 24 inches (610 mm) wide and shall extend the full length of the public use areas of the platform....
-
Administrative Authority
A governmental agency that adopts or enforces regulations and guidelines for the design, construction, or alteration of buildings and facilities....
-
Service Entrances: ADA Standard Section 206.4.8
Section 206.4.8 covers scoping requirements in the most current ADA Standards for accessible routes to service entrances.
-
ADDITION
[DSA-AC] An expansion, extension or increase in the gross floor area or height of a building or facility....
-
11B-106.5 Defined terms
Italicized terms indicate definitions carried forward from the 2010 California Building Code. ◼ ACCESS AISLE ACCESSIBILITY ACCESSIBLE ACCESSIBLE ELEMENT ACCESSIBLE MEANS OF...
-
11B-201.1 Scope
All areas of newly designed and newly constructed buildings and facilities and altered portions of existing buildings and facilities shall comply with these requirements....
- Corbin Russwin Inc. BLSS Trim Lever Handle & Lockset
-
SCOPE OF THE INVESTIGATION
reassignment of services, assignment of aides, home visits, or other methods of compliance or, if these methods are not effective in making the programs accessible, physical changes to buildings...
-
TRANSIENT LODGING
[DSA-AC] A building or facility containing one or more guest room(s) for sleeping that provides accommodations that are primarily short-term in nature (generally 30 days or less)....
-
4.3.2 Seat Height
4.3.2 Seat Height Seat height is an important dimension for establishing the height of built-in seating, toilet heights, tub heights, shower seat heights and other transfer related surfaces...