Faceplate Brass or Stainless Steel, 1-1/4" wide Stop Works Stainless Steel, Rocker Type Escutcheon Stainless Steel, 8-5/32" x 2-9/32" x 29/64" Lever Stainless Steel, refer to Trim Section...
Search Results "Section 505"
Commonly Searched Documents
- TownSteel MSE-32-II Classroom Intruder with Indicator on Inside Mechanical Mortise
- AccessRec PathMat Temporary ADA Beach Access Mat
- ADA Veracity ADA Pro Application
-
Directional visual sign vs. room identification tactile sign
If that is how this sign is used, it would be classified as a "visual" sign, and would require conformance with the ADA Standards section 703.5, and would not require the raised lettering...
-
Exception for accessible means of egress in existing buildings in IBC 2000
Accessible means of egress shall comply with Sections 1003.2.13.1 through 1003.2.13.7.1. Accessible spaces shall be provided with not less than one accessible means of egress....
-
11B-234.3 Minimum number
Amusement rides shall provide at least one wheelchair space complying with Section 11B-1002.4, or at least one amusement ride seat designed for transfer complying with Section 11B-1002.5...
-
Exceptions for Historic Facilities
community requested that information be provided on the consultation procedures to be followed when applying the exceptions for alterations to qualified historic buildings or facilities in section...
-
11B-702.1 General
Fire alarm systems shall have permanently installed audible and visible alarms complying with NFPA 72 and Chapter 9, Sections 907.5.2.1 and 907.5.2.3. [2010 ADAS] 702.1 General. ...
-
Toilet Paper Dispensers
Requirements for toilet paper dispensers in section 604.7 include specifications for height....
-
Question: What are the obligations of a public entity receiving federal financial assistance that owns and controls track through a station?
Answer: Under 49 CFR section 37.42(c), when a new or altered platform is adjacent to a track shared with existing freight operations, the railroad providing passenger service, and...
-
11B-234.3 Minimum number
Amusement rides shall provide at least one wheelchair space complying with Section 11B-1002.4, or at least one amusement ride seat designed for transfer complying with Section 11B-1002.5...
-
11B-702.1 General
Fire alarm systems shall have permanently installed audible and visible alarms complying with NFPA 72 and Chapter 9, Sections 907.5.2.1 and 907.5.2.3. [2010 ADAS] 702.1 General....
-
11B-702.1 General
Fire alarm systems shall have permanently installed audible and visible alarms complying with NFPA 72 and Chapter 9, Sections 907.5.2.1 and 907.5.2.3....
-
§35.105 Self-evaluation
§35.105 Self-evaluation Section 35.105 establishes a requirement, based on the section 504 regulations for federally assisted and federally conducted programs, that a public entity evaluate...
-
DSA IR 11B-6 ACCESSIBILITY REVIEW OF MECHANICAL (HVAC) PROJECTS (revised 05/27/2021)
CBC Section 11B-202.4 Exception 7 exempts HVAC “only” projects from the accessible path of travel requirements....
-
11B-802.1.5 Overlap
The term "circulation paths" used in Section 11B-802.1.5 means aisle width required by applicable building or life safety codes for the specific assembly occupancy....
-
11B-607.4.1.1 Back wall
Two grab bars shall be installed on the back wall, one located in accordance with Section 11B-609.4 and the other located 8 inches (203 mm) minimum and 10 inches (254 mm) maximum above the...
-
1009.3.2 Stairway width
Exceptions: The clear width of 48 inches (1219 mm) between handrails is not required in buildings equipped throughout with an automatic sprinkler system installed in accordance with Section...
-
Safe Harbors
The term "Safe Harbor" does not appear in CBC, but a similar provision is included in Exception 2 at Section 11B-202.4. ...
-
11B-206.7 Platform lifts
Platform lifts shall comply with Section 11B-410. Platform lifts shall be permitted as a component of an accessible route in new construction in accordance with Section 11B-206.7....
-
11B-810.9 Escalators
Where provided, escalators shall comply with the sections 6.1.3.5.6 and 6.1.3.6.5 of ASME A17.1 and shall have a clear width of 32 inches (813 mm) minimum....
-
F216.4.2 Areas of Refuge
Signs required by section 1003.2.13.5.4 of the International Building Code (2000 edition) or section 1007.6.4 of the International Building Code (2003 edition) (incorporated by reference...
-
2.5 National and International Standards Settings Organizations and MDE Activities
2.5 National and International Standards Settings Organizations and MDE Activities As mentioned in Section 2.4.2, MDE must already meet a variety of standards before it can be marketed...
-
216.4.2 Areas of Refuge
Signs required by section 1003.2.13.5.4 of the International Building Code (2000 edition) or section 1007.6.4 of the International Building Code (2003 edition) (incorporated by reference...